Sisal Polishing Disc Si/W/PK | Metal Polish | 350 mm

Biased Sisal Cloth

Diameter 350 mm

12 Ply / 27 mm

Weight: kg
€76.06
Incl. VAT (Total price depending on the VAT rate of the country of delivery), excl. Shipping Cost
  • Buy 3 for €73.78 each and save 3%
  • Buy 5 for €70.74 each and save 7%
  • Buy 10 for €66.93 each and save 12%
Availability
2-3 Days *
Item No.
145-SiWPK-350

Product description Si-W-PK | 350mm

EICKELIT pre-polishing discs of the type Si-W-PK consist of 12 plies of a highly compressed sisal fabric connected with a large number of concentric stitched seams. This fabric is biased by 45° against the weaving direction. As a result, the EICKELIT sisal fabric discs are particularly strong and are therefore suitable for pre-polishing all metal surfaces, but especially for particularly hard materials such as stainless steel. Pre-polishing with SI-W-PK discs provides matt surfaces that are optimally prepared for further surface refinement .

Product features

  • Compacted sisal fabric, 12 plies, maximum counter pressure, extra strong attack
  • Circular quilted circles (10 mm spacing) made of natural linen machine thread ensure residue-free wear together with the sisal trimming
  • Each disc is calibrated individually for a particularly low-vibration concentricity. This ensures a high level of work safety and a particularly uniform polishing pattern
  • Diameter 350 mm, thickness approx. 27 mm
  • Vmax = 40 m/s, Umax = 2,200 min-1

Bore Holes

  • We manufacture your desired bore individually for you. We cover every known bore diameter for industrial polishing machines *
  • If you need other bore diameters or special adapters (e.g. for hexagonal shafts, with keyways, etc.), we will be happy to manufacture them on request **

* Polishing discs drilled individually at the customer's request are excluded from exchange or return in accordance with our Terms of Cancellation.

** Observe safety regulations for the minimum diameter of drive shafts!

Sisal fibers are produced worldwide in tropical cultivation areas from special agave species. Like many other natural fibers, sisal fibers have proven to be very resistant to physical and chemical influences. In addition, sisal is particularly tough, has high tensile strength and is nevertheless relatively stiff. Due to these properties, sisal fabrics are particularly suitable for the high mechanical loads that typically occur when pre-polishing metals and especially steel.

Areas of application

  • Fine grinding / pre-polishing non-ferrous metals, steel, stainless steel
  • When polishing with sisal fabrics, uniform matt surfaces are created. The abrasive effect of pure sisal corresponds to a fine sanding of approx. grit 280
  • Use of sisal fabric pre-polishing discs with diameters > 200 mm exclusively on the polishing stand
  • Si/W/PK pre-polishing wheels are operated optimally at cutting speeds of approx. 25-40 m/s

Cut-Buffing Tools Selection

SI-W-PK SB-VR SB-4 SB-3 SB-XL Sisal-Cord
SI-W-PK SB-VR SB-4 SB-3 SB-XL Cord
Attack SI-W-PK5 SB-VR3 SB-43 SB-33 SB-L3 Cord5
Flexi­bility SI-W-PK1 SB-VR1 SB-43 SB-32 SB-L4 Cord5
Cooling SI-W-PK1 SB-VR1 SB-43 SB-35 SB-L5 Cord4

Please select the type of cutting disc that best suits your polishing project from the above table (5 = "more" → 1 = "less")

Dressing sisal polishing tools

  • An optimal polishing result can only be achieved with carefully prepared polishing tools. Therefore, please read our recommendations for the optimal preparing and dressing sisal polishing tools
  • You should also dress your used polishing tools regularly. This is particularly necessary if residues of the polishing paste have solidified in the wheel or your polishing wheels are heavily contaminated due to material abrasion.

General Information on Polishing