Skip to the beginning of the images gallery

Shank-Tool "Cut Buffing" | Sisal-Cotton | 125 x 18 mm

SPECIAL OFFER

Sisal-Cotton SB-VR

Diameter: 125 x 8 mm Shaft

Thickness: ca. 18 mm

Weight: kg

€18.00

Incl. VAT (Total price depending on the VAT rate of the country of delivery), excl. Shipping Cost

Buy 3 for €17.46 each and save 3%
Buy 5 for €16.74 each and save 7%
Buy 10 for €15.84 each and save 12%

Availability

2-3 Days *

Shank Tool

SB-VR-7 Sisal-Cotton

Qty

Copy Product Link

Item No.

603-SBVR-7-125

Description

Shaft Tool Sisal Nettle | 125x18mm

SB-VR polishing tools are made of fully rounded layers of close-meshed sisal fabric covered with cotton on both sides and enable fine grinding and pre-polishing in just one operation. With high back pressure, matt to silky shiny surfaces can be achieved, which are often further processed without additional surface finishing.

PRODUCT FEATURES

Shaft tool with 7 layers of dense sisal fabric, lined with cotton on both sides and sewn
Concentric quilted circles made of natural linen thread, wear off during the polishing process without leaving any residue and at the same time as the sisal nettle trimming
Diameter 125 mm, thickness approx. 18 mm
Cast mandrel with 8 mm diameter
V_max = 30 m/s, U_max = 4,600 min^-1

Safety instructions

Protective Equipment when Polishing

When grinding and polishing, the work equipment used creates considerable health risks. It is therefore compulsory to wear suitable personal protective equipment for work safety when grinding and polishing. In particular, all rotating polishing and brushing tools may only be operated with suitable covers for reasons of occupational safety.

Wear eye / face protection

The fine dust emanating from polishing is harmful to the eyes. Flying parts can cause serious injuries to the face and eyes.

Wear respiratory protection

Fine dust contaminated with heavy metals and respirable, which can only be retained with suitable respiratory protection, is produced during polishing.

Wear protective clothing

Flying parts can cause sensitive injuries all over the body.

Wear gloves

In general, gloves should be worn when grinding and polishing. If there is a risk of being wound up (e.g. drills, processing small parts, etc.), gloves may be prohibited on the basis of a risk assessment.