Polishing set "super-finish" Varnishes & Plastics | 4 parts for polishing stand | 300 mm
300 mm | Bore configurable
Contents: polishing discs | compounds
high-gloss | super-finish
Polishing-kit "super finish" for plastics and varnishes | polishing stand | 300mm
Four-part super finish polishing kit for plastics and varnishes especially for the polishing block or grinding block with mounting flange or conical thread. This polishing set reliably delivers in two consecutive steps a flawless, super brillant gloss and transparency on plastics and varnishes.
High-gloss polishing wheel EFFEKTA N16, diameter 300 mm with freely configurable bore
Super Finish EFFEKTA FM230 polishing wheel, diameter 300 mm with freely configurable bore
Measure the pressure carefully! Too high contact pressure and/or too low speeds lead to overheating of the workpiece with uneven surfaces that can no longer be improved by polishing!
The evenly pre-polished and cleaned surface in cross passes with the EFFEKTA N16 polishing wheel and Menzerna GW16 on lacquer and thermoset surfaces at approx. 20-25 m/s (1,300 - 1,600 rpm), on thermoplastic workpieces at approx. 10 -15 m/s (650 - 980 rpm) quickly polish to a high gloss
After polishing, the surface is cleaned with a dry, soft and lint-free cloth. If necessary, degrease the workpiece with a tenside solution
The clean, high-gloss polished surface is achieved with the EFFEKTA FM209 super finish polishing disc and Menzerna P175 on lacquer and thermoset surfaces at approx. 20-25 m/s (1,300 - 1,600 rpm), on thermoplastic workpieces at approx. 10 -15 m/s (650 - 980 rpm) quickly in cross passes until the desired mirror finish is achieved
The Super Finish Paste P175 only leaves an invisible microfilm on the flawless surface. To protect this surface, one usually avoids mechanical cleaning after superfinishing