KONSTANT 4-4 are high-efficiency buffing tools that are particularly suitable for the buffing and finish of non-ferrous metals and stainless steel. 4 x 4 plies of raw cotton fabric, twisted diagonally against its weaving direction, are arranged in a spiral around a cardboard core and thus provide a solid contact pressure. The pleated folds of the KONSTANT 4-4 polishing discs ensure effective cooling of the work pieces even at high performance levels.
Buffing wheel made of 4 x 4 pleated plies of raw cotton fabric with 45° biased weave
Medium to solid contact pressure for effective cut-buffing and fine-buffing on non-ferrous metal and stainless steel
Adapts flexible to complex surface geometries
Diameter 150 - 600 mm
Configurable bore holes 10 - 60 mm
Calibrated for low-vibration concentricity
Optionally roughened ready for use
Raw Cotton Fabric N189
N189 is a very strong raw cotton plain weave fabric with a specific weight of approx. 260 g / m². Buffing tools made of N189 are used in particular for the effective cut-buffing of non-iron, steel and stainless steel.
* Observe the safety regulations for the minimum diameter of drive shafts!
We manufacture your desired bore individually for you. We cover every known bore diameter for industrial polishing machines *
If you need other bore diameters or special adapters (e.g. for hexagonal shafts, with keyways, etc.), we will be happy to manufacture them on request **
* Polishing discs drilled individually at the customer's request are excluded from exchange or return in accordance with our Terms of Cancellation.
Careful preparation of the buffing / polishing tool is a prerequisite for an optimal surface result. Please follow our recommendations for trimming cotton buffing wheels
Used buffing discs should also be dressed again on a regular basis. This is especially true if residues of polishing paste have solidified on the working surface or the buffing wheels are heavily contaminated with material abrasion