Skip to the beginning of the images gallery

Shank-Tool "Cut Buffing" | Sisal-Cotton | 150 x 18 mm

SPECIAL OFFER

Sisal-Cotton SB-VR

Diameter: 150 x 8 mm Shaft

Thickness: ca. 18 mm

Weight: kg

€20.00

Incl. VAT (Total price depending on the VAT rate of the country of delivery), excl. Shipping Cost

Buy 3 for €19.40 each and save 3%
Buy 5 for €18.60 each and save 7%
Buy 10 for €17.60 each and save 12%

Availability

2-3 Days *

Shank Tool

SB-VR-7 Sisal-Cotton

Qty

Copy Product Link

Item No.

603-SBVR-7-150

Description

Shank-Tool Sisal-Cotton| 150 x 18 mm

SB-VR polishing tools are made of fully round, double-sided layers of close-meshed sisal fabric covered with cotton and enable fine grinding and cut-buffing in just one operation. With high counter pressure, matt to silky glossy surfaces are achieved, which are often already further processed without additional surface finishing.

Product Features

Shank tool with 7 Plies of dense Sisal fabric, double-sided covered with cotton and stitched
Concentric quilting circles made of natural linen thread, wears off during the polishing process without leaving any residue and at the same time as the sisal nettle trim
Diameter 150 mm, thickness ca. 18 mm
Cast mandrel with 8 mm diameter
V_max = 30 m/s, U_max = 3,800 min^-1

Safety instructions

Protective Equipment when Polishing

When grinding and polishing, the work equipment used creates considerable health risks. It is therefore compulsory to wear suitable personal protective equipment for work safety when grinding and polishing. In particular, all rotating polishing and brushing tools may only be operated with suitable covers for reasons of occupational safety.

Wear eye / face protection

The fine dust emanating from polishing is harmful to the eyes. Flying parts can cause serious injuries to the face and eyes.

Wear respiratory protection

Fine dust contaminated with heavy metals and respirable, which can only be retained with suitable respiratory protection, is produced during polishing.

Wear protective clothing

Flying parts can cause sensitive injuries all over the body.

Wear gloves

In general, gloves should be worn when grinding and polishing. If there is a risk of being wound up (e.g. drills, processing small parts, etc.), gloves may be prohibited on the basis of a risk assessment.