Skip to the beginning of the images gallery

Pre-polishing brushes sisal cord | drill shaft | 100 mm

Sisal Cords 8-fach geknüpft

Diameter: 100 x 6 mm Shank

Thickness: 35 mm

Weight: kg

€26.18

Incl. VAT (Total price depending on the VAT rate of the country of delivery), excl. Shipping Cost

Availability

2-3 Days *

Shank Tool

Sisal Cord Brush

Qty

Copy Product Link

Item No.

602-SiKo-100

Description

Sisal cord | drill shaft | 100 mm

Cut-buffing brushes with 8-strand knotted sisal cord bristles are especially suitable for rough surface processing of workpieces with a complex surface profile. In particular the flexible sisal bristles can penetrate into recesses, undercuts, corners and edges that are otherwise difficult to access. Together with a suitable, coarse polishing paste, sisal cord cut-buffing brushes provide a fine finish that is suitable as preparation for subsequent buffing, coating or anodizing.

Our shank tools are miniature versions of the tried and tested EICKELIT designs. They complement the buffing process when it comes to the precise cut-buffing and finishing, particularly of surfaces with complex geometries.

PRODUCT FEATURES

Shank tool made from 8-strand knotted sisal cords with a thickness of 5 mm
Diameter 100 mm, width 25 mm
Shaft diameter of 6 mm, cast with thermosetting synthetic resin compound
V_max = 30 m/s, U_max = 5,700 min^-1

SISAL CORDS

Sisal is obtained from specific agave species in global cultivation areas. Similar to other natural fibers, sisal fibers are very resistant to physical and chemical stresses. In addition, sisal is very tough, has high tensile strength and is also characterized by its high rigidity. This is why sisal is particularly suitable for polishing and coarse cut-buffing of metals and especially steel.

For sisal cord brushes, we only use braided cords of European manufacturers containing highest-quality sisal raw material with particularly long fibers. The cords of approx. 5 mm thickness are braided from 8-strands.

This makes our cord brushes particularly soft and flexible and at the same time very resistant to heavy duty usage during polishing. Therefore, our Sisal cord brushes ensure an excellent service life and effective polishing attack.

Safety instructions

Protective Equipment when Polishing

When grinding and polishing, the work equipment used creates considerable health risks. It is therefore compulsory to wear suitable personal protective equipment for work safety when grinding and polishing. In particular, all rotating polishing and brushing tools may only be operated with suitable covers for reasons of occupational safety.

Wear eye / face protection

The fine dust emanating from polishing is harmful to the eyes. Flying parts can cause serious injuries to the face and eyes.

Wear respiratory protection

Fine dust contaminated with heavy metals and respirable, which can only be retained with suitable respiratory protection, is produced during polishing.

Wear protective clothing

Flying parts can cause sensitive injuries all over the body.

Wear gloves

In general, gloves should be worn when grinding and polishing. If there is a risk of being wound up (e.g. drills, processing small parts, etc.), gloves may be prohibited on the basis of a risk assessment.