Shank-Mounted Flap Wheel | Abrasive Non-Woven SC-006

Silicon Carbide "Fine" | Grit 240

Dia: 50 - 100 mm

Thickness: 50 mm

Weight: kg
€17.18
Incl. 19% VAT, excl. Shipping Cost
Availability
2-3 Days *
Item No.
648-SC-006

Product description SiC abrasive fleece shank tools Grit 240

EICKELIT abrasive fleece shank tools are made with flaps or discs of a nylon random fleece with firmly bonded abrasive grain. They are used in particular for cleaning, fine grinding, satin finishing and matting of non-ferrous metals and steels, as well as a large number of other fields of application.

Thanks to the very flexible tangled fleece, fleece lamella polishing tools are particularly suitable for gentle removal on complex profiles and geometries. During use, the backing material is constantly worn away, constantly releasing fresh abrasive particles on the tool surface, the concentrations of which always remain the same. As a result, the polishing tools made of fiber abrasive fleece are maintenance-free and provide a very uniform grinding pattern over their entire service life.

Product features

  • Silicon carbide abrasive fleece flap shank tool
  • "Fine" grit (Grit 240 [CAMI])
  • Diameters from 50 - 100 mm
  • Thickness 50 mm
  • Mandrel with a diameter of 6 - 8 mm cast with duroplastic synthetic resin
  • Vmax = 25 m/s, Umax = 4,800 / 6,000 / 9,800 min-1 (diameter 50 / 80 / 100 mm)

Dimensions

Schaftwerkzeug Schleifvlies Zeichnung
  • Schaftwerkzeug Schleifvlies Dimensionen Tabelle
  • * Observe the safety regulations for the minimum clamping depth of shank tools!

Areas of Application

  • Non-woven polishing tools are suitable for the surface treatment of metal (steel, INOX, non-ferrous metals and alloys) and non-metal surfaces (plastics, paints, wood, etc.)
  • Their wide area of application includes for instance cleaning, descaling, deburring, fine grinding, roughening, matting, satin finishing, etc.

Application Instructions

  • New abrasive fleece polishing tools must first be carefully run in until a uniform finish is achieved
  • In order to avoid overheating and a subsequent disturbance of the surface structure that is difficult to correct afterwards, abrasive fleece polishing tools should be operated with as moderate to low pressure as possible
  • Basically, the rule applies that a lower cutting speed produces a coarser matting image
  • The following guide values apply to the typical cutting speeds of non-woven abrasive polishing tools:
    • Non-ferrous metals 15-25 m/s
    • Steels 15-25 m/s
    • Thermosets 10-25 m/s
    • Thermoplastics 8-15 m/s
    • Acrylic glass 3-8 m/s