Non-Woven Shop-Roll SC-006
10 x 0,1 m
Nylon / Si-C
"Fein" / Grit 240
PRODUCT DESCRIPTION SANDING FLEECE roll SC-006 | GRIT 240
EICKELIT abrasive fleece is particularly suitable for cleaning, fine grinding, matting and satin finishing of steel and non-ferrous metals. With our wide range of abrasive nonwovens based on silicon carbide with different strengths and grain sizes, we answer a wide variety of application-related requirements from our customers.
Thanks to the great flexibility of the tangled fleece, complex profiles and geometries in particular can be processed very efficiently and with gentle removal. In the process, the backing material is constantly being worn down, so fresh grinding particles are constantly being released in uniform concentrations on the tool surface. This creates a uniform grinding pattern throughout the service life.
With its very sharp-edged crystals, abrasive fleeces based on silicon carbide are sharper than corundum and thus provide more effective removal. Due to its higher hardness, silicon carbide is used in particular on non-ferrous metals, low-carbon tool steels and ceramic and mineral materials.
PRODUCT FEATURES
- SC-006 has a medium-firm structure, the grit corresponds to approx. grit 240 for a fine finish
- Width approx. 100 mm / length approx. 10 m
- Delivery form: roll
Benötigen Sie weitere technische Informationen, folgen Sie bitte den folgenden Links zum Schleifvlies-Sortiment und unseren Anwendungstechnischen Tipps und Hinweisen.
Protective Equipment when Polishing
When grinding and polishing, the work equipment used creates considerable health risks. It is therefore compulsory to wear suitable personal protective equipment for work safety when grinding and polishing. In particular, all rotating polishing and brushing tools may only be operated with suitable covers for reasons of occupational safety.
Wear eye / face protection
The fine dust emanating from polishing is harmful to the eyes. Flying parts can cause serious injuries to the face and eyes.
Wear respiratory protection
Fine dust contaminated with heavy metals and respirable, which can only be retained with suitable respiratory protection, is produced during polishing.
Wear protective clothing
Flying parts can cause sensitive injuries all over the body.
Wear gloves
In general, gloves should be worn when grinding and polishing. If there is a risk of being wound up (e.g. drills, processing small parts, etc.), gloves may be prohibited on the basis of a risk assessment.
Wear ear protection
Due to the noise exposure during grinding and polishing, it is necessary to wear suitable hearing protection on a regular basis.
"Fine" SC-006 | Grit 240
Diameter 80 - 200 mm
Bore 12 mm
Packing Unit = 10 pc