Shank-Mounted Flap Wheel | Abrasive Non-Woven AO-003

Corundum "Coarse" | Grit 100

Dia: 50 - 100 mm

Thickness: 50 mm

Weight: kg
€15.23
Incl. 19% VAT, excl. Shipping Cost
Availability
2-3 Days *
Item No.
648-AO-003

Product description Abrasive fleece shaft Tool Grit 100

Abrasive fleece shank tools from EICKELIT consist of a nylon random fleece with firmly bonded abrasive grain. They are used for cleaning, fine grinding, satin finishing and matting of non-ferrous metals and steels, as well as a large number of other fields of application. With our wide range of abrasive fleeces based on aluminum oxide or silicon carbide, we manufacture polishing tools of different strengths and grain sizes.

Stray fleeces are very flexible, which is why fleece lamellar polishing discs in particular can be used very efficiently to process complex geometries with gentle removal. Due to the constant wear of the carrier material, the tool surface always releases fresh abrasives in a constant concentration. As a result, abrasive fleece shank tools are maintenance-free and deliver a perfectly uniform grinding pattern during their service life.

Product features

  • Aluminum oxide abrasive fleece lamella shank tool
  • "Coarse" grit (Grit 100 [CAMI])
  • Diameters from 50 - 100 mm
  • Thickness 50 mm
  • Mandrel with a diameter of 6 - 8 mm cast with duroplastic synthetic resin
  • Vmax = 25 m/s, Umax = 4,800 / 6,000 / 9,800 min-1 (diameter 50 / 80 / 100 mm)

Dimensions

Schaftwerkzeug Schleifvlies Zeichnung
  • Schaftwerkzeug Schleifvlies Dimensionen Tabelle
  • * Observe the safety regulations for the minimum clamping depth of shank tools!

Areas of Application

  • Non-woven polishing tools are suitable for the surface treatment of metal (steel, INOX, non-ferrous metals and alloys) and non-metal surfaces (plastics, paints, wood, etc.)
  • Their wide area of application includes for instance cleaning, descaling, deburring, fine grinding, roughening, matting, satin finishing, etc.

Application Instructions

  • New abrasive fleece polishing tools must first be carefully run in until a uniform finish is achieved
  • In order to avoid overheating and a subsequent disturbance of the surface structure that is difficult to correct afterwards, abrasive fleece polishing tools should be operated with as moderate to low pressure as possible
  • Basically, the rule applies that a lower cutting speed produces a coarser matting image
  • The following guide values apply to the typical cutting speeds of non-woven abrasive polishing tools:
    • Non-ferrous metals 15-25 m/s
    • Steels 15-25 m/s
    • Thermosets 10-25 m/s
    • Thermoplastics 8-15 m/s
    • Acrylic glass 3-8 m/s