Polishing set "Gloss" Inox | 7 parts for angle grinder | M14 adapter | 250 mm
250 mm | 14 mm bore
Contents: polishing discs | compounds | adapter M14
cutting | polishing | colouring
Stainless steel "cut-buffing / polishing / colouring" set for angle grinders | 250 mm
With this seven-part polishing set for stainless steel, finely ground INOX components can be polished and refined to a high gloss finish in a three-step buffing action: pre-polishing, main polishing and high gloss finish. With this complete polishing set, you can reliably achieve the flawless mirror finish that is characteristic of stainless steel on carefully ground INOX surfaces.
Product features
- Cut buffing disc Sisal-Cotton SB-VR-10, D = 250 mm, S = 25 mm, B = 14 mm
- Cotton buffing disc, raw cotton fabric N2550 "firm", 3 quilting seams, D = 250 mm, S = 25 mm, B = 14 mm
- High gloss buffing disc, raw cotton fabric N2501 "light", 3 quilting seams, D = 250 mm, S = 25 mm, B = 14 mm
- Vmax = 30 m/s, Umax = 3,100 rpm
- Pre-polishing paste "Heavy Cut" Menzerna 439T (approx. 1.2 kg)
- Stainless steel main polishing compound Menzerna P14F (approx. 1, 3 kg)
- High gloss finish compound for stainless steel Menzerna P175 (approx. 1 .35 kg)
- M14 mandrel for angle grinders, maximum disc thickness: approx. 50 mm, 1 flat nut M14 left-hand thread / approx. 70 mm diameter, 1 flange 2 x 14 x 70 mm
Application
- Wear protective equipment and follow safety regulations!
- Roughen the polishing discs before use using a suitable dressing tool
- Wet rotating tool sparingly with polishing paste
Step 1
- Polish the evenly sanded and cleaned surface in cross passes with the SB-VR-10 sisal-nettle disc together with Menzerna 439T quickly pre-polish at approx. 25-30 m/s (1,900 - 2,300 rpm) until the workpiece has an even, satin-matt surface without scratches or grooves
- After polishing, clean the surface of abrasion and paste residues with a dry, soft and lint-free cloth. If necessary, degrease the workpiece with a suitable solvent or Viennese lime
Step 2
- Quickly polish the evenly cut-buffed and cleaned surface in cross passes with the firm polishing disc N2550 together with Menzerna P14F at approx. 25-30 m/s (1,900 - 2,300 rpm) to a high gloss
- After polishing, clean the surface with a dry, soft, lint-free cloth. If necessary, degrease the workpiece with a suitable solvent or Viennese lime
Step 3
- Finish the clean, glossy surface with the light N2501 buffing disc together with Menzerna P126 INOX high gloss compound at approx. 25-30 m/s (1,900 - 2,300 rpm) quickly and in cross passes until a fine high gloss finish is obtained
Protective Equipment when Polishing
When grinding and polishing, the work equipment used creates considerable health risks. It is therefore compulsory to wear suitable personal protective equipment for work safety when grinding and polishing. In particular, all rotating polishing and brushing tools may only be operated with suitable covers for reasons of occupational safety.
Wear eye / face protection
The fine dust emanating from polishing is harmful to the eyes. Flying parts can cause serious injuries to the face and eyes.
Wear respiratory protection
Fine dust contaminated with heavy metals and respirable, which can only be retained with suitable respiratory protection, is produced during polishing.
Wear protective clothing
Flying parts can cause sensitive injuries all over the body.
Wear gloves
In general, gloves should be worn when grinding and polishing. If there is a risk of being wound up (e.g. drills, processing small parts, etc.), gloves may be prohibited on the basis of a risk assessment.
Wear ear protection
Due to the noise exposure during grinding and polishing, it is necessary to wear suitable hearing protection on a regular basis.