Polishing set "finish" Inox | 3 parts for angle grinder | M14 adapter | 150 mm

INOX polishing set for Angle Grinders | 150 mm

Polishing set for high-gloss polishing of stainless steel surfaces with hand polishing machines or angle grinders with M 14 shank. The polishing set quickly delivers a clear high gloss on carefully pre-polished INOX surfaces.

Product features

• High-gloss polishing wheel made of fully round layers of raw cotton N2501, 3-fold quilted, D = 150 mm, S = 25 mm, W = 14 mm
• V_max = 40 m/s, U_max = 5,200 rpm
• Stainless steel high-gloss polishing paste Menzerna P126 (approx. 1, 3 kg)
• M14 mandrel for angle grinders, maximum disc thickness: approx. 50 mm, 1 flat nut M14 left-hand thread / approx. 70 mm diameter, 1 flange 2 x 14 x 70 mm

Application

• Wear protective equipment and follow safety regulations!
• Roughen the polishing wheel first with the help of a suitable dressing tool
• Wet the rotating tool with the polishing paste
• Polish the evenly pre-polished and clean surface quickly in cross-coats at approx. 25-30 m/s (3,200 - 3,900 rpm) to a high gloss
• Measure the pressure carefully! If the contact pressure is too high and/or the speed is too low, this can lead to an unsteady surface due to overheating of the workpiece
• After polishing, clean the surface with a soft, lint-free cloth and, if necessary, degrease with a suitable solvent or Viennese lime