Sisal Polishing Disc Si/W/PK | Metal Polish | 300 mm

Biased Sisal Cloth

Diameter 300 mm

12 Ply / 27 mm

Weight: kg
€63.06
Incl. VAT (Total price depending on the VAT rate of the country of delivery), excl. Shipping Cost
  • Buy 3 for €61.17 each and save 3%
  • Buy 5 for €58.65 each and save 7%
  • Buy 10 for €55.49 each and save 12%
Availability
2-3 Days *
Item No.
145-SiWPK-300

Product description Si-W-PK | 300mm

The pre-polishing disc Si-W-PK consists of 12 tightly quilted plies of sisal fabric with a biased weave pattern. The resulting strength of the polishing discs makes them the ideal tool for vigorous pre-polishing of all metal surfaces. Sisal fabric pre-polishing discs are used especially on very hard materials such as e.g. B. stainless steel is used. Surfaces pre-polished with SI-W-PK polishing discs provide a satin-matt shine and are therefore optimally prepared for the subsequent finishing processes.

Product features

  • Compacted sisal fabric in 12 layers provides maximum counter pressure and extra effective pre-polishing
  • Circular quilted circles made from a natural linen machine thread spaced 10 mm apart. These wear out without leaving any residue and at the same time as the sisal trimming
  • Each polishing wheel is individually calibrated for low-vibration concentricity and thus ensures maximum work safety, productivity and trouble-free polishing patterns
  • Diameter 300 mm, thickness approx. 27 mm
  • Vmax = 40 m/s, Umax = 2,500 min-1

Bore Holes

  • We manufacture your desired bore individually for you. We cover every known bore diameter for industrial polishing machines *
  • If you need other bore diameters or special adapters (e.g. for hexagonal shafts, with keyways, etc.), we will be happy to manufacture them on request **

* Polishing discs drilled individually at the customer's request are excluded from exchange or return in accordance with our Terms of Cancellation.

** Observe safety regulations for the minimum diameter of drive shafts!

The growing areas of the natural raw material sisal are located in tropical and subtropical zones worldwide. The sisal fibers are obtained there from specific agave species. Like many other natural fibers made from cellulose, sisal fibers are also very resistant to physical and chemical influences. Sisal is particularly characterized by its toughness and tensile strength combined with very high rigidity. For this reason, sisal is particularly suitable for rough usage, which are characteristic for the pre-polishing of metals and especially steel.

Areas of application

  • Fine grinding and pre-polishing of non-ferrous metals, tool steel, stainless steel
  • The abrasive effect of pure sisal corresponds to a cut of approx. grit 280
  • Pre-polishing discs Si/W/PK made of sisal fabric provide a matt to satin-matt surface, depending on the polishing paste used
  • Polishing discs with diameters > 200 mm should only be used on the appropriate polishing block
  • For sisal pre-polishing discs, we recommend optimal cutting speeds of approx. 25-40 m/s

Cut-Buffing Tools Selection

SI-W-PK SB-VR SB-4 SB-3 SB-XL Sisal-Cord
SI-W-PK SB-VR SB-4 SB-3 SB-XL Cord
Attack SI-W-PK5 SB-VR3 SB-43 SB-33 SB-L3 Cord5
Flexi­bility SI-W-PK1 SB-VR1 SB-43 SB-32 SB-L4 Cord5
Cooling SI-W-PK1 SB-VR1 SB-43 SB-35 SB-L5 Cord4

Please select the type of cutting disc that best suits your polishing project from the above table (5 = "more" → 1 = "less")

Dressing sisal polishing tools

  • The basic prerequisite for optimal polishing is careful preparation of the polishing discs. Therefore, please follow our recommendations and instructions for the optimal dressing of sisal polishing discs
  • Even dirty polishing tools should be redressed regularly. This applies in particular if residues of polishing paste have solidified or the polishing discs are heavily contaminated due to material abrasion.

General Information on Polishing