Sisal Polishing Disc Si/W/PK | Metal Polish | 200 mm

Biased Sisal Cloth

Diameter 200 mm

12 Ply / 27 mm

Weight: kg
€41.75
Incl. VAT (Total price depending on the VAT rate of the country of delivery), excl. Shipping Cost
  • Buy 5 for €40.50 each and save 3%
  • Buy 10 for €38.83 each and save 7%
  • Buy 20 for €36.74 each and save 12%
Availability
2-3 Days *
Item No.
145-SiWPK-200

Product description Si-W-PK | 200mm

EICKLEIT Si-W-PK pre-polishing discs consist of firmly quilted 12 layers of biased sisal fabric. As a result of, these pre-polishing discs are particularly firm and are therefore suitable for pre-polishing all metal surfaces and stainless steel in particular. Pre-polishing with SI-W-PK creates matt surfaces that are well prepared for subsequent polishing steps.

Product features

  • Compressed sisal fabric, 12 quilted plies for maximum counter pressure and particularly effective pre-polishing
  • Quilted circles made of natural linen machine thread, concentrically spaced 10 mm apart, wear off without leaving any residue during polishing
  • Particularly low-vibration concentricity for high work safety and a trouble-free polishing finish due to the individual calibration of the EICKELIT polishing discs
  • Diameter 200 mm, thickness approx. 27 mm
  • Vmax = 40 m/s, Umax = 3,800 min-1

Bore Holes

  • We manufacture your desired bore individually for you. We cover every known bore diameter for industrial polishing machines *
  • If you need other bore diameters or special adapters (e.g. for hexagonal shafts, with keyways, etc.), we will be happy to manufacture them on request **

* Polishing discs drilled individually at the customer's request are excluded from exchange or return in accordance with our Terms of Cancellation.

** Observe safety regulations for the minimum diameter of drive shafts!

The natural substance sisal is a cellulose fiber that is obtained from agaves in global cultivation areas. Like other natural fibers, sisal fibers are also very resistant to physical and chemical stress. Sisal is also extremely tough, has high tensile strength and is very stiff at the same time. This is why tools with sisal trimmings are particularly suitable for the intensive pre-polishing of metals.

Areas of application

  • Pre-polishing of non-ferrous metals, tool steel, stainless steel
  • Because the abrasive effect of pure sisal corresponds to a fine sanding with a grit of approx. 280, pre-polishing discs made of sisal fabric create a satin-matt surface
  • SI/W/PK pre-polishing discs with a diameter of up to 200 mm are suitable for manual use with straight grinders and flexible shafts. Larger diameters should only be used on the polishing stand.
  • For pre-polishing with SI-W-PK, we recommend a polishing paste with approx. grit 240 (non-ferrous metals) and approx. grit 280 (steel / stainless steel)
  • The optimal cutting speed of sisal fabric polishing discs is approx. 25-40 m/s

Cut-Buffing Tools Selection

SI-W-PK SB-VR SB-4 SB-3 SB-XL Sisal-Cord
SI-W-PK SB-VR SB-4 SB-3 SB-XL Cord
Attack SI-W-PK5 SB-VR3 SB-43 SB-33 SB-L3 Cord5
Flexi­bility SI-W-PK1 SB-VR1 SB-43 SB-32 SB-L4 Cord5
Cooling SI-W-PK1 SB-VR1 SB-43 SB-35 SB-L5 Cord4

Please select the type of cutting disc that best suits your polishing project from the above table (5 = "more" → 1 = "less")

Dressing sisal polishing tools

  • Prerequisite for an optimal polishing result is the careful preparation of the polishing tool. Please follow our recommendations for Dressing of sisal polishing tools
  • Used polishing tools should also be redressed regularly. This applies in particular if residues of polishing paste have solidified or the polishing tools are heavily soiled with material abrasion.

General Information on Polishing