Skip to the beginning of the images gallery

Cut-Buffing Brush | Sisal Cord | 200 mm

8-Strand Knotted Sisal Cord

Thickness 15 mm

Ø 200 mm

Weight: kg

€23.16

Incl. VAT (Total price depending on the VAT rate of the country of delivery), excl. Shipping Cost

Buy 3 for €22.47 each and save 3%
Buy 5 for €21.54 each and save 7%
Buy 10 for €20.38 each and save 12%

Availability

2-3 Days *

Bore Hole

Qty

Copy Product Link

Item No.

124-SiKo-200

Description

PRODUCT DESCRIPTION SISAL CORD BRUSHES

EICKELIT sisal cord pre-polishing brushes can be used to pre-polish shaped workpiece surfaces in particular. The flexible sisal bristles otherwise only reach indentations, undercuts, corners and edges that are difficult to reach. This means that workpieces with complex shapes can be polished in just one step. Together with coarse pre-polishing pastes, sisal cord brushes provide a fine finish on stainless steel, aluminum and other non-ferrous metals. The surface is thus ideally prepared for subsequent process steps such as high-gloss polishing or anodizing.

Sisal fibers are particularly resistant to physical and chemical stress. Sisal is also very tough, has high tensile strength and is also characterized by its high rigidity. Due to its gently abrasive effect, sisal in the form of fabrics or cords is particularly suitable for pre-polishing metals and especially steel.

EICKELIT sisal cord pre-polishing brushes use 8-strand knotted, approx. 5 mm thick sisal cords made in Europe. Especially long-fiber sisal is used for the cords specially made for EIKELIT, which makes them very soft and flexible. This ensures excellent service life and the particularly effective attack of our EICKELIT sisal cord brushes.

For a more powerful attack, we recommend our impregnated sisal cord pre-polishing brushes.

PRODUCT FEATURES

Brush made of 8-strand knotted sisal cords, 5 mm thick
Phenolic resin-reinforced cardboard core with security oblique stitching made of high-carbon steel staples
Each disc is calibrated individually for low-vibration concentricity and a smooth finish
Diameter 200 mm, thickness approx. 15 mm
Freely selectable bores 10 - 65 mm
V_max = 40 m/s, U_max = 3,900 min^-1

Bore Holes

We manufacture your desired bore individually for you. We cover every known bore diameter for industrial polishing machines *
If you need other bore diameters or special adapters (e.g. for hexagonal shafts, with keyways, etc.), we will be happy to manufacture them on request **

* Polishing discs drilled individually at the customer's request are excluded from exchange or return in accordance with our Terms of Cancellation.

** Observe safety regulations for the minimum diameter of drive shafts!

Application

Safety instructions

Protective Equipment when Polishing

When grinding and polishing, the work equipment used creates considerable health risks. It is therefore compulsory to wear suitable personal protective equipment for work safety when grinding and polishing. In particular, all rotating polishing and brushing tools may only be operated with suitable covers for reasons of occupational safety.

Wear eye / face protection

The fine dust emanating from polishing is harmful to the eyes. Flying parts can cause serious injuries to the face and eyes.

Wear respiratory protection

Fine dust contaminated with heavy metals and respirable, which can only be retained with suitable respiratory protection, is produced during polishing.

Wear protective clothing

Flying parts can cause sensitive injuries all over the body.

Wear gloves

In general, gloves should be worn when grinding and polishing. If there is a risk of being wound up (e.g. drills, processing small parts, etc.), gloves may be prohibited on the basis of a risk assessment.

Wear ear protection

Due to the noise exposure during grinding and polishing, it is necessary to wear suitable hearing protection on a regular basis.