Skip to the beginning of the images gallery

Menzerna 523NG | "Super-Heavy-Cut" Compound | 250 gr | Aluminium, Brass, Stainless

"Super Heavy Cut" for Aluminium, Brass, Stainless

Colour: Grey | Grease Content: Fatty

Small container 250 gr

Weight: kg

€7.45

€29.80 / kg

Incl. VAT (Total price depending on the VAT rate of the country of delivery), excl. Shipping Cost

Availability

2-3 Days *

Polishing Compound

523NG

Qty

Copy Product Link

Item No.

300-523ng-250

Description

Menzerna 523NG brushing paste "Super Heavy Cut"

523NG is an aggressive brushing paste with particularly quick removal. It has been specially developed for non-ferrous metals (brass, copper, bronze), aluminum, steel and stainless steel. This paste replaces the paste 523LBZ, which was previously only available to professionals, but does not contain the potentially harmful quartz abrasives. The Menzerna 423NBZ brush paste allows you to create particularly even, matt surface images in a very short time. The rich mixture was developed particularly for use on steel and stainless steel.

The high-quality special paste 523NG is used together with pre-polishing discs or pre-polishing brushes made of Tampico Fiber or Sisal.

Product features

Highly abrasive brush paste for pre-polishing non-ferrous metals, steel and stainless steel
Weight: 250 g
Particularly high removal rates with an evenly matt polishing result.
Processing together with sisal or fiber polishing discs
Fat content: fat

Safety instructions

Protective Equipment when Polishing

When grinding and polishing, the work equipment used creates considerable health risks. It is therefore compulsory to wear suitable personal protective equipment for work safety when grinding and polishing. In particular, all rotating polishing and brushing tools may only be operated with suitable covers for reasons of occupational safety.

Wear eye / face protection

The fine dust emanating from polishing is harmful to the eyes. Flying parts can cause serious injuries to the face and eyes.

Wear respiratory protection

Fine dust contaminated with heavy metals and respirable, which can only be retained with suitable respiratory protection, is produced during polishing.

Wear protective clothing

Flying parts can cause sensitive injuries all over the body.

Wear gloves

In general, gloves should be worn when grinding and polishing. If there is a risk of being wound up (e.g. drills, processing small parts, etc.), gloves may be prohibited on the basis of a risk assessment.