Skip to the beginning of the images gallery

Cut-Buffing Wheel | Sisal-Cotton SB-VR | 100 mm

Sisal-Cotton Plies

Diameter 100 x 25 mm

Bores 10 - 24 mm

For the bench grinder or angle grinder

Weight: kg

€19.80

Incl. VAT (Total price depending on the VAT rate of the country of delivery), excl. Shipping Cost

Buy 5 for €19.21 each and save 3%
Buy 10 for €18.41 each and save 7%
Buy 25 for €17.42 each and save 12%

Availability

2-3 Days *

Bore Hole

Qty

Copy Product Link

Item No.

227-SBVR-100

Description

Sisal-Cotton Cut-Buffing Discs SB-VR

SB-VR cut-buffing discs consist of a manifold of sisal sheets, each covered with cotton on both sides. Compared to the grinding work of pure sisal, sisal-cotton tools additionally display a surface smoothing effect due to the cotton inserts. Moreover, compared to other SB polishing discs, SB-VR polishing tools allow the highest counter pressure for improved effectiveness. As a result, SB-VR deliver matt to silky glossy surfaces, which in industrial practice are often further processed without requiring additional finish-buffing.

PRODUCT FEATURES

10 plies made of dense cotton covered sisal fabric, both fabrics with 45° biased weave
Concentric quilted circles made of natural linen machine thread, which wears off during the polishing process without leaving any residue
Individually calibrated, for low-vibration concentricity and a smooth polished finish
Diameter 100 mm, width 25 mm
Bore hole diameters 10 - 24 mm
Particularly suitable for use on the bench grinder or with angle grinders
V_max = 40 m/s, r_max = 8.000 min^-1

Bore Holes

We manufacture your desired bore individually for you. We cover every known bore diameter for industrial polishing machines *
If you need other bore diameters or special adapters (e.g. for hexagonal shafts, with keyways, etc.), we will be happy to manufacture them on request **

* Polishing discs drilled individually at the customer's request are excluded from exchange or return in accordance with our Terms of Cancellation.

** Observe safety regulations for the minimum diameter of drive shafts!

Application

Cut-Buffing Tools Selection

	SI-W-PK	SB-VR	SB-4	SB-3	SB-XL	Cord

Attack	SI-W-PK5	SB-VR3	SB-43	SB-33	SB-L3	Cord5
Flexibility	SI-W-PK1	SB-VR1	SB-43	SB-32	SB-L4	Cord5
Cooling	SI-W-PK1	SB-VR1	SB-43	SB-35	SB-L5	Cord4

Please select the type of cutting disc that best suits your polishing project from the above table (5 = "more" → 1 = "less")

Safety instructions

Protective Equipment when Polishing

When grinding and polishing, the work equipment used creates considerable health risks. It is therefore compulsory to wear suitable personal protective equipment for work safety when grinding and polishing. In particular, all rotating polishing and brushing tools may only be operated with suitable covers for reasons of occupational safety.

Wear eye / face protection

The fine dust emanating from polishing is harmful to the eyes. Flying parts can cause serious injuries to the face and eyes.

Wear respiratory protection

Fine dust contaminated with heavy metals and respirable, which can only be retained with suitable respiratory protection, is produced during polishing.

Wear protective clothing

Flying parts can cause sensitive injuries all over the body.

Wear gloves

In general, gloves should be worn when grinding and polishing. If there is a risk of being wound up (e.g. drills, processing small parts, etc.), gloves may be prohibited on the basis of a risk assessment.