Cut-Buffing Disc| Sisal-Cotton SB-VR | 180 mm

Sisal-Cotton Plies

Diameter 180 x 25 mm

Bores 14 - 40 mm

For the bench grinder or polishing bench

Weight: kg
€30.82
Incl. 19% VAT, excl. Shipping Cost
  • Buy 3 for €29.90 each and save 3%
  • Buy 5 for €28.66 each and save 7%
  • Buy 10 for €27.12 each and save 12%
Availability
2-3 Days *
Item No.
227-SBVR-180

Sisal-Cotton Cut-Buffing Discs SB-VR

SB-VR cut-buffing discs consist of a manifold of sisal sheets, each covered with cotton on both sides. Compared to the grinding work of pure sisal, sisal-cotton tools additionally display a surface smoothing effect due to the cotton inserts. Moreover, compared to other SB polishing discs, SB-VR polishing tools allow the highest counter pressure for improved effectiveness. As a result, SB-VR deliver matt to silky glossy surfaces, which in industrial practice are often further processed without requiring additional finish-buffing.

PRODUCT FEATURES

  • 10 plies made of dense cotton covered sisal fabric, both fabrics with 45° biased weave
  • Concentric quilted circles made of natural linen machine thread, which wears off during the polishing process without leaving any residue
  • Individually calibrated, for low-vibration concentricity and a smooth polished finish
  • Diameter 180 mm, width 25 mm
  • Bore hole diameters 14 - 40 mm
  • Optional with bore hole reinforcement
  • Particularly suitable for use on a bench grinder or polishing bench
  • Vmax = 40 m/s, rmax = 4.300 min-1

Bore Holes

  • We manufacture your desired bore individually for you. We cover every known bore diameter for industrial polishing machines *
  • If you need other bore diameters or special adapters (e.g. for hexagonal shafts, with keyways, etc.), we will be happy to manufacture them on request **

* Polishing discs drilled individually at the customer's request are excluded from exchange or return in accordance with our Terms of Cancellation.

** Observe safety regulations for the minimum diameter of drive shafts!

Cut-Buffing Tools Selection

SI-W-PK SB-VR SB-4 SB-3 SB-XL Sisal-Cord
SI-W-PK SB-VR SB-4 SB-3 SB-XL Cord
Attack SI-W-PK5 SB-VR3 SB-43 SB-33 SB-L3 Cord5
Flexi­bility SI-W-PK1 SB-VR1 SB-43 SB-32 SB-L4 Cord5
Cooling SI-W-PK1 SB-VR1 SB-43 SB-35 SB-L5 Cord4

Please select the type of cutting disc that best suits your polishing project from the above table (5 = "more" → 1 = "less")

Dressing of sisal polishing tools

  • Careful preparation of the polishing tool is a prerequisite for an optimal polishing result. Please follow our recommendations for dressing sisal polishing tools
  • Used polishing tools should also be dressed again on a regular basis. This applies in particular if residues of polishing paste have solidified or the polishing tools are heavily contaminated with material abrasion.

General Information on Polishing