Shank-Mounted Flap Wheel | Abrasive Non-Woven AO-004

Corundum "Intermediate" | Grit 180

Dia: 50 - 100 mm

Thickness: 50 mm

Weight: kg
€15.23
Incl. 19% VAT, excl. Shipping Cost
Availability
2-3 Days *
Item No.
648-AO-004

Product description Abrasive fleece shank tool Grit 180

EICKELIT abrasive fleece shank tools are made of random fleece nylon with firmly bonded abrasive grain. Fleece shank tools are particularly suitable for cleaning, fine grinding, matting and satin finishing of steel and non-ferrous metals. With our wide range of abrasive fleeces based on aluminum oxide or silicon carbide with different strengths and grain sizes, we answer a wide variety of application-related requirements from our customers .

Thanks to the great flexibility of the tangled fleece, complex profiles and geometries in particular can be processed very efficiently and with very gentle removal with fleece shank tools. In the process, the backing material is constantly being worn down, so fresh grinding particles are constantly being released in uniform concentrations on the tool surface. That's why polishing tools made of fiber abrasive fleece are particularly low-maintenance and provide a very uniform grinding pattern over their entire service life.

Product features

  • Aluminum oxide abrasive fleece lamella shank tool
  • Grit "Medium" (Grit 180 [CAMI])
  • Diameters from 50 - 100 mm
  • Thickness 50 mm
  • Mandrel with a diameter of 6 - 8 mm cast with duroplastic synthetic resin
  • Vmax = 25 m/s, Umax = 4,800 / 6,000 / 9,800 min-1 (diameter 50 / 80 / 100 mm)

Dimensions

Schaftwerkzeug Schleifvlies Zeichnung
  • Schaftwerkzeug Schleifvlies Dimensionen Tabelle
  • * Observe the safety regulations for the minimum clamping depth of shank tools!

Areas of Application

  • Non-woven polishing tools are suitable for the surface treatment of metal (steel, INOX, non-ferrous metals and alloys) and non-metal surfaces (plastics, paints, wood, etc.)
  • Their wide area of application includes for instance cleaning, descaling, deburring, fine grinding, roughening, matting, satin finishing, etc.

Application Instructions

  • New abrasive fleece polishing tools must first be carefully run in until a uniform finish is achieved
  • In order to avoid overheating and a subsequent disturbance of the surface structure that is difficult to correct afterwards, abrasive fleece polishing tools should be operated with as moderate to low pressure as possible
  • Basically, the rule applies that a lower cutting speed produces a coarser matting image
  • The following guide values apply to the typical cutting speeds of non-woven abrasive polishing tools:
    • Non-ferrous metals 15-25 m/s
    • Steels 15-25 m/s
    • Thermosets 10-25 m/s
    • Thermoplastics 8-15 m/s
    • Acrylic glass 3-8 m/s