Polishing set "gloss" copper & brass | 4 parts for polishing stand | 150 mm

Brass & Copper high-gloss polishing set for the polishing stand | 150mm

Four-piece high-gloss polishing set for Brass & Copper, especially for stationary bench grinders or bench polishers. This polishing set reliably delivers the flawless high gloss characteristic of Brass & Copper on carefully ground Brass & Copper surfaces.

Product features

• Sisal nettle pre-polishing disc SB-VR-10, diameter 150 mm with configurable bore
• High-gloss cotton buffing disc N2501, diameter 150 mm with configurable bore
• V_max = 45 m/s, U_max = 5,700 rpm
• Pre-polishing paste "Heavy Cut" Menzerna 456G (approx. 1.2 kg)
• Brass & Copper high-gloss polishing paste Menzerna 480W (approx. 1, 3 kg)

Application

• Wear protective equipment and follow safety regulations!
• Roughen the polishing discs before use using a suitable dressing tool
• Wet rotating tool sparingly with polishing paste
• Measure the pressure carefully! Too high contact pressure and/or too low speeds lead to overheating of the workpiece with uneven surfaces that can no longer be improved by polishing!

Step 1

• The evenly sanded and cleaned surface crosswise with the SB-VR-10 sisal nettle pre-polishing disc together with Menzerna 456G quickly pre-polish at approx. 35-40 m/s (4,400 - 5,100 rpm) until an even, satin-matt surface without scratches and grooves is achieved on the workpiece
• After polishing, clean the surface of abrasion and paste residues with a dry, soft and lint-free cloth. If necessary, degrease the workpiece with a suitable solvent or Viennese lime

Step 2

• The evenly pre-polished and cleaned surface in cross passes with a high-gloss cotton buffing disc N2501 together with Menzerna 480W at approx. 30-35 m/s (3,900 - 4,500 rpm) quickly polish to a high gloss
• After polishing, clean the surface with a dry, soft, lint-free cloth. If necessary, degrease the workpiece with a suitable solvent or Viennese lime