Polishing set "Gloss" copper & brass | 4 parts for drill | 125 mm
125 mm | 8 mm shank
Contents: polishing discs | compounds
cut-buffing | high-gloss
Brass & Copper "high gloss" polishing set for drills | 125mm
The four-part super finish polishing set for Brass & Copper enables hard-to-reach Brass & Copper components to be polished to a high gloss. This polishing set reliably delivers the flawless mirror finish that is characteristic of Brass & Copper on carefully pre-polished Brass & Copper surfaces.
Product features
- SB-VR-10 sisal-cotton shank tool, 125 x 8 mm
- Cotton shank tool N16, 125 x 8 mm
- Vmax = 30 m/s, Umax = 4,600 rpm
- Pre-polishing paste "Heavy Cut" Menzerna 456G (approx. 1.2 kg)
- Brass & Copper high gloss polishing paste Menzerna 480W (approx. 1.35 kg)
Application
- Wear protective equipment and follow safety regulations!
- Roughen the polishing discs before use using a suitable dressing tool
- Wet rotating tool sparingly with polishing paste
Step 1
- The evenly sanded and cleaned surface crosswise with the SB-VR-10 sisal nettle shaft tool together with Menzerna 456G quickly pre-polish at approx. 25-30 m/s (4,000 - 4,600 rpm) until an even, satin-matt surface without scratches and grooves is achieved on the workpiece
- After polishing, clean the surface of abrasion and paste residues with a dry, soft and lint-free cloth. If necessary, degrease the workpiece with a suitable solvent or Viennese lime
Step 2
- The evenly pre-polished and cleaned surface in cross passes with a cotton shank tool N16 together with Menzerna 480W at approx. 25-30 m/s (4,000 - 4,600 rpm) quickly polish to a high gloss
- After polishing, clean the surface with a dry, soft, lint-free cloth. If necessary, degrease the workpiece with a suitable solvent or Viennese lime
Protective Equipment when Polishing
When grinding and polishing, the work equipment used creates considerable health risks. It is therefore compulsory to wear suitable personal protective equipment for work safety when grinding and polishing. In particular, all rotating polishing and brushing tools may only be operated with suitable covers for reasons of occupational safety.
Wear eye / face protection
The fine dust emanating from polishing is harmful to the eyes. Flying parts can cause serious injuries to the face and eyes.
Wear respiratory protection
Fine dust contaminated with heavy metals and respirable, which can only be retained with suitable respiratory protection, is produced during polishing.
Wear protective clothing
Flying parts can cause sensitive injuries all over the body.
Wear gloves
In general, gloves should be worn when grinding and polishing. If there is a risk of being wound up (e.g. drills, processing small parts, etc.), gloves may be prohibited on the basis of a risk assessment.
Wear ear protection
Due to the noise exposure during grinding and polishing, it is necessary to wear suitable hearing protection on a regular basis.