Polishing set "finish" Inox | 2 parts for polishing stand | 180 mm

180 mm | Bore configurable

Contents: polishing disc | compound


Weight: kg
€47.15 -5% You save €2.36
Incl. VAT (Total price depending on the VAT rate of the country of delivery), excl. Shipping Cost

Discount compared to single retail prices

2-3 Days *
  • Buy 1 for €21.95 each and save 5%
  • Buy 1 for €22.85 each and save 5%
Item No.

INOX polishing set for Polishing Stands | 180 mm

Polishing set for high-gloss polishing of stainless steel surfaces on the grinding or polishing stand. The polishing set quickly delivers a clear high gloss on carefully pre-polished INOX surfaces.

Product features

  • High-gloss polishing wheel made of fully round layers of raw cotton N2501, 3-fold quilted, D = 180 mm, S = 25 mm, bore-hole configurable
  • Vmax = 40 m/s, Umax = 4,300 rpm
  • Stainless steel high-gloss polishing paste Menzerna P126 (approx. 1, 3 kg)


  • Wear protective equipment and follow safety regulations!
  • Roughen the polishing wheel first with the help of a suitable dressing tool
  • Wet the rotating tool with the polishing paste
  • Polish the evenly pre-polished and clean surface quickly in cross-coats at approx. 25-30 m/s (2,700 - 3,200 rpm) to a high gloss
  • Measure the pressure carefully! If the contact pressure is too high and/or the speed is too low, this can lead to an unsteady surface due to overheating of the workpiece
  • After polishing, clean the surface with a soft, lint-free cloth and, if necessary, degrease with a suitable solvent or Viennese lime