Polishing set "finish" aluminium | 2 parts for polishing stand | 300 mm

300 mm | Bore configurable

Contents: polishing disc | compound


Weight: kg
€66.59 -5% You save €3.33
Incl. 19% VAT, excl. Shipping Cost
2-3 Days *
  • Buy 1 for €38.66 each and save 5%
  • Buy 1 for €24.61 each and save 5%
Item No.

Aluminium polishing set "Finish" for the polishing stand | 300mm

Polishing set with configurable bore for high-gloss polishing on the polishing block or grinding block with mounting flange or conical thread. The two-part polishing set quickly delivers a clear high gloss on carefully pre-polished aluminum surfaces.

Product features

  • Effecta N2550 polishing wheel, diameter 300 mm / configurable bore
  • Vmax = 40 m/s, Umax = 2,600 rpm
  • Aluminium high-gloss polishing paste Menzerna 480BLF (approx. 1, 3 kg)


  • Wear protective equipment and follow safety regulations!
  • First roughen the polishing wheel with the help of a suitable dressing tool
  • Wet the rotating tool with the polishing paste
  • Polish the evenly pre-polished and clean surface quickly in cross-coats at approx. 30-35 m/s (1,900 - 2,300 rpm) to a high gloss
  • Measure the pressure carefully! If the contact pressure is too high and/or the speed is too low, this can lead to an unsteady surface due to overheating of the workpiece
  • After polishing, clean the surface with a soft, lint-free cloth and, if necessary, degrease with a suitable solvent or Viennese lime