Polishing set "Gloss" Varnishes & Plastics | 4 parts for drill | 100 mm
100 mm | 6 mm shank
Contents: polishing discs | compounds
cut-buffing | high-gloss
Weight:
kg
Item No.
500-bm-poly-100-3
Plastics and Varnish "high gloss" polishing-kit | drills | 100mm
The four-part high gloss polishing set enables hard-to-reach plastics or varnished components to be polished to a high gloss. This polishing set reliably delivers on carefully ground surfaces in two consecutive steps a flawless high gloss and transparency
Product features
- Shank tool EFFEKTA N2550, 100 x 6 mm
- Shank tool EFFEKTA FM230, 100 x 6 mm
- Vmax = 30 m/s, Umax = 5,700 rpm
- Pre-polishing paste "Heavy Cut" Menzerna GW18 (approx. 1.1 kg)
- Plastics and paint high gloss polishing compound Menzerna GW16 (approx. 1.35 kg)
Application
- Wear protective equipment and follow safety regulations!
- Roughen the polishing discs before use using a suitable dressing tool
- Wet rotating tool sparingly with polishing paste
Step 1
- The evenly sanded and cleaned surface crosswise with the shank tool EFFEKTA N2550 together with Menzerna GW18 quickly pre-polish on lacquer and thermoset surfaces at approx. 20-25 m/s (3,800 - 4,900 rpm), on thermoplastic workpieces at approx. 10 -15 m/s (2,000 - 2,800 rpm) until an even, satin-matt surface without scratches and grooves is achieved on the workpiece
- After polishing, clean the surface of abrasion and paste residues with a dry, soft and lint-free cloth. If necessary, degrease the workpiece with a tenside solution
Step 2
- The evenly pre-polished and cleaned surface in cross passes with a shank tool EFFEKTA FM230 together with Menzerna GW16 on lacquer and thermoset surfaces at approx. 20-25 m/s (3,800 - 4,900 rpm), on thermoplastic workpieces at approx. 10 -15 m/s (2,000 - 2,800 rpm) quickly polish to a high gloss
- After polishing, clean the surface with a dry, soft, lint-free cloth. If necessary, degrease the workpiece with a tenside solution