Polishing set "finish" Varnishes & Plastics | 2 parts for drill | 150 mm
150 mm | 8 mm shank
Contents: polishing disc | compound
Polishing-kit for plastics and varnishes "high-gloss" | drills | 150mm
Polishing set for high-gloss polishing of hard-to-reach plastics or varnished components with a drill. The polishing set quickly delivers a clear high gloss and transparency on carefully pre-polished surfaces.
Polish the evenly pre-polished and clean surface quickly in cross-coats on lacquer and thermoset surfaces at approx. 20-25 m/s (2,600 - 3,200 rpm), on thermoplastic workpieces at approx. 10 -15 m/s (1,300 - 1,900 rpm) to a high gloss
Measure the pressure carefully! If the contact pressure is too high and/or the speed is too low, this can lead to an unsteady surface due to overheating of the workpiece
After polishing, clean the surface with a soft, lint-free cloth and, if necessary, degrease with a tenside solution