Polishing set "complete" Varnishes & Plastics | 6 parts for angle grinder M14 | 250 mm
250 mm | 14 mm bore
Contents: polishing discs | compounds
cut-buffing | high-gloss | super-finish
Weight:
kg
Item No.
500-ws-poly-250-4
Polishing-kit "complete" for Plastics & Varnishes | angle grinders | 250mm
Six-part polishing-kit for plastics and varnishes, especially for hand-held polishing machines or angle grinders with M14 mount. This polishing set reliably delivers a flawless shine and transparency on plastics and varnishes on carefully ground surfaces in three consecutive polishing steps.
Product features
- Cut-buffing disc KONSTANT N16, Diameter 250 mm, customizable bore
- High-Gloss buffing wheel EFFEKTA X-1 "Seamless", flannell FM230, Diameter 250 mm, customizable bore
- Super-Finish buffing wheel EFFEKTA X-1 "Seamless", super-soft flannell FM209, Diameter 250 mm, customizable bore
- Vmax = 40 m/s, Umax = 3,100 rpm
- Pre-Polishing Compound "Heavy Cut" Menzerna GW18 (ca. 1,1 kg)
- Finish Polishing Compound for plastics & varnishes Menzerna GW16 (ca. 1,3 kg)
- Super Finish Compound for Metals and Polymers Menzerna P175 (ca. 1,35 kg)
Application
- Wear protective equipment and follow safety regulations!
- Roughen the polishing discs before use using a suitable dressing tool
- Wet rotating tool sparingly with polishing paste
- Measure the pressure carefully! Too high contact pressure and/or too low speeds lead to overheating of the workpiece with uneven surfaces that can no longer be improved by polishing!
- Set your polishing drive to the correct speed. You determine this based on the cutting speeds suitable for your polishing project and the wheel diameter you are using.
Step 1 - Pre-polishing
- The evenly sanded and cleaned surface crosswise with the cut-buffing disc KONSTANT N16 together with Menzerna GW18 quickly pre-polish on lacquer and thermoset surfaces at approx. 20-25 m/s (1,550 - 1,950 rpm), on thermoplastic workpieces at approx. 10 -15 m/s (780 - 1,150 rpm) until the workpiece has an even, satin-matt surface without scratches or grooves
- After polishing, clean the surface of abrasion and paste residues with a dry, soft and lint-free cloth. If necessary, degrease the workpiece with a tenside solution
Step 2 - High Gloss
- The evenly pre-polished and cleaned surface in cross passes with buffing wheel EFFEKTA FM230 together with Menzerna GW16 on lacquer and thermoset surfaces at approx. 20-25 m/s (1,550 - 1,950 rpm), on thermoplastic workpieces at approx. 10 -15 m/s (780 - 1,150 rpm) quickly polish to a high gloss
- After polishing, clean the surface with a dry, soft, lint-free cloth. If necessary, degrease the workpiece with a tenside solution
Step 3 - Superfinish
- The clean surface, polished to a high gloss, is achieved with the EFFEKTA FM209 super finish polishing disc and Menzerna P175 on lacquer and thermoset surfaces at approx. 20-25 m/s (1,550 - 1,950 rpm), on thermoplastic workpieces at approx. 10 -15 m/s (780 - 1,150 rpm) quickly in cross passes until the desired mirror finish is achieved
- The Super Finish Paste P175 only leaves an invisible microfilm on a flawless surface. To protect this surface, one usually avoids mechanical cleaning after superfinishing