Polishing set "Gloss" Inox | 4 parts for angle grinder M14 | 150 mm

150 mm | 14 mm bore

Contents: polishing discs | compounds

cutting | polishing | colouring

Weight: kg
€114.46 -5% You save €5.72
€108.74
Incl. 19% VAT, excl. Shipping Cost
Availability
2-3 Days *
  • Buy 1 for €16.25 each and save 5%
  • Buy 1 for €14.73 each and save 5%
  • Buy 1 for €20.43 each and save 5%
  • Buy 1 for €24.84 each and save 5%
  • Buy 1 for €18.41 each and save 5%
  • Buy 1 for €14.09 each and save 5%
Item No.
500-ws-inox-150-3

Stainless steel "cut-buffing / polishing / colouring" set for angle grinders | 150 mm

With this six-part polishing set for stainless steel, finely ground INOX components can be polished and refined to a high gloss finish in a three-step buffing action: pre-polishing, main polishing and high gloss finish. With this complete polishing set, you can reliably achieve the flawless mirror finish that is characteristic of stainless steel on carefully ground INOX surfaces.

Product features

  • Cut buffing disc Sisal-Cotton SB-VR-10, D = 150 mm, S = 25 mm, B = 14 mm
  • Cotton buffing disc, raw cotton fabric N2550 "firm", 3 quilting seams, D = 150 mm, S = 25 mm, B = 14 mm
  • High gloss buffing disc, raw cotton fabric N2501 "light", 3 quilting seams, D = 150 mm, S = 25 mm, B = 14 mm
  • Vmax = 40 m/s, Umax = 5,200 rpm
  • Pre-polishing paste "Heavy Cut" Menzerna 439T (approx. 1.2 kg)
  • Stainless steel main polishing compound Menzerna P14F (approx. 1, 3 kg)
  • High gloss finish compound for stainless steel Menzerna P175 (approx. 1 .35 kg)

Application

Step 1

  • Polish the evenly sanded and cleaned surface in cross passes with the SB-VR-10 sisal-nettle disc together with Menzerna 439T quickly pre-polish at approx. 25-30 m/s (3,200 - 3,900 rpm) until the workpiece has an even, satin-matt surface without scratches or grooves
  • After polishing, clean the surface of abrasion and paste residues with a dry, soft and lint-free cloth. If necessary, degrease the workpiece with a suitable solvent or Viennese lime

Step 2

  • Quickly polish the evenly cut-buffed and cleaned surface in cross passes with the firm polishing disc N2550 together with Menzerna P14F at approx. 25-30 m/s (3,200 - 3,900 rpm) to a high gloss
  • After polishing, clean the surface with a dry, soft, lint-free cloth. If necessary, degrease the workpiece with a suitable solvent or Viennese lime

Step 3

  • Finish the clean, glossy surface with the light N2501 buffing disc together with Menzerna P126 INOX high gloss compound at approx. 25-30 m/s (3,200 - 3,900 rpm) quickly and in cross passes until a fine high gloss finish is obtained