Polishing set "Gloss" copper & brass | 4 parts for angle grinder M14 | 150 mm

Brass & Copper high-gloss polishing set for angle grinders | 150mm

Four-part high-gloss polishing set for Brass & Copper, especially for hand-held polishing machines or angle grinders with M14 mount. This polishing set reliably delivers the flawless high gloss characteristic of Brass & Copper on carefully ground Brass & Copper surfaces.

Product features

• Pre-polishing disc sisal nettle SB-VR-10, diameter 150 mm x bore 14 mm
• V_max = 45 m/s, U_max = 5,700 rpm
• high-gloss buffing wheel N2501, diameter 150 mm x bore 14 mm
• V_max = 40 m/s, U_max = 5,100 rpm
• Pre-polishing paste "Heavy Cut" Menzerna 456G (approx. 1.2 kg)
• Brass & Copper high-gloss polishing paste safety regulations!
• Roughen the polishing discs before use using a suitable dressing tool
• Wet rotating tool sparingly with polishing paste
• Measure the pressure carefully! Too high contact pressure and/or too low speeds lead to overheating of the workpiece with uneven surfaces that can no longer be improved by polishing!

Step 1

• The evenly sanded and cleaned surface crosswise with the SB-VR-10 sisal nettle pre-polishing disc together with Menzerna 456G quickly pre-polish at approx. 35-40 m/s (4,400 - 5,100 rpm) until an even, satin-matt surface without scratches and grooves is achieved on the workpiece
• After polishing, clean the surface of abrasion and paste residues with a dry, soft and lint-free cloth. If necessary, degrease the workpiece with a suitable solvent or Viennese lime

Step 2

• The evenly pre-polished and cleaned surface in cross passes with a high-gloss buffing wheel N2501 together with Safety instructions

  Protective Equipment when Polishing

  When grinding and polishing, the work equipment used creates considerable health risks. It is therefore compulsory to wear suitable personal protective equipment for work safety when grinding and polishing. In particular, all rotating polishing and brushing tools may only be operated with suitable covers for reasons of occupational safety.

  

  Wear eye / face protection

  The fine dust emanating from polishing is harmful to the eyes. Flying parts can cause serious injuries to the face and eyes.

  

  Wear respiratory protection

  Fine dust contaminated with heavy metals and respirable, which can only be retained with suitable respiratory protection, is produced during polishing.

  

  Wear protective clothing

  Flying parts can cause sensitive injuries all over the body.

  

  Wear gloves

  In general, gloves should be worn when grinding and polishing. If there is a risk of being wound up (e.g. drills, processing small parts, etc.), gloves may be prohibited on the basis of a risk assessment.

  

  Wear ear protection

  Due to the noise exposure during grinding and polishing, it is necessary to wear suitable hearing protection on a regular basis.

  Details according to Regulation (EU) 2023/988 (GPSR)

  Manufacturer

  Menzerna polishing compounds GmbH & Co. KG, Industriestraße 25,76470 ÖTIGHEIM, info@menzerna.com

  Responsible Person

  Menzerna polishing compounds GmbH & Co. KG, Abteilung Produkt- und Umweltsicherheit, Industriestraße 25,76470 ÖTIGHEIM, sds@menzerna.com