Skip to the beginning of the images gallery

Finish Buffing Wheel EFFEKTA | Molton "Soft" | 150 mm

Material: FM230

12 Pleated Layers / 100 % Seamless

Diameter: 150 mm

Weight: kg

€30.50

Incl. VAT (Total price depending on the VAT rate of the country of delivery), excl. Shipping Cost

Buy 3 for €29.59 each and save 3%
Buy 5 for €28.37 each and save 7%
Buy 10 for €26.84 each and save 12%

Availability

2-3 Days *

Bore Hole

Ready-to-Use Roughened

Ready-to-Use Roughened + €2.00

Qty

Copy Product Link

Item No.

082-FM230-150

Description

PRODUCT FEATURES

Very soft finish buffing wheel made of premium raw cotton flannel fabrics with 45° biased weave
24 individually pleated plies
100% seams-free for highest mirror gloss
Diameter 150 mm, core-thickness ca. 22 mm/li>
Individual bore from 10 - 24 mm
Calibrated for low-vibration concentricity
Optionally pre-roughened ready for use
V_max = 40 m/s, r_max = 5,100 min^-1

Flannel FM230

Flannel FM230 is a raw cotton cretonne finely roughened on both sides with a specific weight of approx. 190 g/m². Polishing discs made of flannel FM230 are used in particular for high-gloss polishing on non-ferrous metals, varnish and plastics.

Bore Holes

We manufacture your desired bore individually for you. We cover every known bore diameter for industrial polishing machines *
If you need other bore diameters or special adapters (e.g. for hexagonal shafts, with keyways, etc.), we will be happy to manufacture them on request **

* Polishing discs drilled individually at the customer's request are excluded from exchange or return in accordance with our Terms of Cancellation.

** Observe safety regulations for the minimum diameter of drive shafts!

Application

Areas of Application

EFFEKTA high-performance buffing wheels with extra soft pleats are particularly suitable for high-end finishing of complex surface geometries of sensitive painted surfaces, including non-ferrous metals and stainless steel.
The very soft, single-layer folds adapt flexibly to any surface geometry, allowing to deeply immerse the workpieces into the disc. Even with extended contact zones, thanks to the EFFEKTA pleats a performant airstream and thus very effective cooling is ensured.
EFFEKTA buffing wheels offer a particularly even high gloss, especially in combination with our 100% seams-free technology.

Safety instructions

Protective Equipment when Polishing

When grinding and polishing, the work equipment used creates considerable health risks. It is therefore compulsory to wear suitable personal protective equipment for work safety when grinding and polishing. In particular, all rotating polishing and brushing tools may only be operated with suitable covers for reasons of occupational safety.

Wear eye / face protection

The fine dust emanating from polishing is harmful to the eyes. Flying parts can cause serious injuries to the face and eyes.

Wear respiratory protection

Fine dust contaminated with heavy metals and respirable, which can only be retained with suitable respiratory protection, is produced during polishing.

Wear protective clothing

Flying parts can cause sensitive injuries all over the body.

Wear gloves

In general, gloves should be worn when grinding and polishing. If there is a risk of being wound up (e.g. drills, processing small parts, etc.), gloves may be prohibited on the basis of a risk assessment.