Universal Polishing Kit "Complete" | Drilling Machines | 150 mm
150 mm | Shank 8 mm
Content: 3 x Shank-Tool & 3 x Polishing Compounds
Cutting-Polishing-Colouring
Universal polishing set for drills | 150mm
This six-piece standard polishing set allows you to achieve a high-quality shine on hard-to-reach parts of different materials. The polishing set is suitable for smaller polishing projects with a drill on surfaces well prepared with P 320 - 600 grinding. This universal polishing set is part of the basic equipment in every well-stocked workshop.
Product features
- Shaft tool SB-VR-10, 150 x 8 mm
- Shaft tool full round N16, 150 x 8 mm
- Shaft tool full round FM230, 150 x 8 mm
- Vmax = 30 m/s, Umax = 3,800 1/min
- Universal EICKELIT pre-polishing paste "Heavy Cut" (approx. 0.2 kg)
- Universal EICKELIT main polish "Medium Cut" (approx. 0.3 kg)
- Universal EICKELIT high-gloss polishing paste "Low Cut" (approx. 0.2 kg)
Application
- Wear protective equipment and follow safety regulations!
- First roughen the polishing disc using a suitable dressing tool
- Wet the rotating tool with the polishing paste
Step 1
- Pre-polish the evenly sanded and cleaned surface in criss-cross passes with the sisal nettle shaft tool SB-VR-10 together with the white polishing paste at approx. 25-30 m/s (3,300 - 3,800 rpm) until an even finish on the workpiece , semi-matt surface without scratches and grooves is achieved
- After polishing, clean the surface of abrasion and paste residue with a dry, soft and lint-free cloth. If necessary, degrease the workpiece with a suitable solvent or Viennese lime
Step 2
- Polish the evenly pre-polished and cleaned surface in criss-cross passes with the full-round blade N16 shaft tool and the green main polish at approx. 25-30 m/s (3,300 - 3,800 rpm) quickly until an evenly shiny surface
- After polishing, clean the surface with a dry, soft, lint-free cloth. If necessary, degrease the workpiece with a suitable solvent or Viennese lime
Step 3
- Polish the clean, shiny polished surface quickly in cross passes to a high gloss using the FM230 full round blade shaft tool and the pink high-gloss polishing paste at approx. 25-30 m/s (3,300 - 3,800 rpm)
Protective Equipment when Polishing
When grinding and polishing, the work equipment used creates considerable health risks. It is therefore compulsory to wear suitable personal protective equipment for work safety when grinding and polishing. In particular, all rotating polishing and brushing tools may only be operated with suitable covers for reasons of occupational safety.
Wear eye / face protection
The fine dust emanating from polishing is harmful to the eyes. Flying parts can cause serious injuries to the face and eyes.
Wear respiratory protection
Fine dust contaminated with heavy metals and respirable, which can only be retained with suitable respiratory protection, is produced during polishing.
Wear protective clothing
Flying parts can cause sensitive injuries all over the body.
Wear gloves
In general, gloves should be worn when grinding and polishing. If there is a risk of being wound up (e.g. drills, processing small parts, etc.), gloves may be prohibited on the basis of a risk assessment.
Wear ear protection
Due to the noise exposure during grinding and polishing, it is necessary to wear suitable hearing protection on a regular basis.