Universal Polishing Kit "Complete" | Drilling Machines | 100 mm

100 mm | Shank 6 mm

Content: 3 x Shank-Tool & 3 x Polishing Compounds

Cutting-Polishing-Colouring

Weight: kg
€97.18 -5% You save €4.86
€92.32
Incl. VAT (Total price depending on the VAT rate of the country of delivery), excl. Shipping Cost

Discount compared to single retail prices

Availability
2-3 Days *
  • Buy 1 for €27.08 each and save 5%
  • Buy 1 for €16.96 each and save 5%
  • Buy 1 for €21.20 each and save 5%
  • Buy 1 for €8.08 each and save 5%
  • Buy 1 for €9.98 each and save 5%
  • Buy 1 for €9.03 each and save 5%
Item No.
500-bm-uni-100-3

Universal polishing set for drills | 100mm

With this six-piece universal polishing set, you can quickly achieve a beautiful high shine on hard-to-reach metal or plastic components on carefully sanded surfaces. The polishing set is suitable for small polishing projects with a drill and is part of the basic equipment of every workshop.

Product features

  • Shaft tool SB-VR-10, 100 x 6 mm
  • Shaft tool full round N16, 100 x 6 mm
  • Shaft tool full round FM230, 100 x 6 mm
  • Vmax = 30 m/s, Umax = 5,700 1/min
  • Universal EICKELIT pre-polishing paste "Heavy Cut" (approx. 0.2 kg)
  • Universal EICKELIT main polish "Medium Cut" (approx. 0.3 kg)
  • Universal EICKELIT high-gloss polishing paste "Low Cut" (approx. 0.2 kg)

Application

  • Wear protective equipment and follow safety regulations!
  • First roughen the polishing disc using a suitable dressing tool
  • Wet the rotating tool with the polishing paste

Step 1

  • Quickly pre-polish the evenly sanded and cleaned surface in criss-cross passes with the sisal nettle shaft tool SB-VR-10 together with the white pre-polishing paste until an even, satin-matt surface without scratches or grooves is achieved on the workpiece.
  • After polishing, clean the surface of abrasion and paste residue with a dry, soft and lint-free cloth. If necessary, degrease the workpiece with a suitable solvent or Viennese lime

Step 2

  • Polish the evenly pre-polished and cleaned surface in criss-cross passes with the N16 full-round blade shaft tool and the green polishing paste at approx. 25-30 m/s (5,000 - 5,700 rpm) to an even shine.
  • After polishing, clean the surface with a dry, soft, lint-free cloth. If necessary, degrease the workpiece with a suitable solvent or Viennese lime

Step 3

  • Polish the clean, shiny polished surface quickly in criss-cross passes to a high gloss using the FM 230 full-round blade shaft tool and the pink high-gloss polishing paste at approx. 25-30 m/s (5,000 - 5,700 rpm)