Universal Polishing Kit for Drills | Colouring | 80 mm
80 mm | Shank 6 mm
Content: Shank-Tool & Polishing Compound
Colouring
Universal polishing set for drills | 80mm
This universal polishing set is suitable for high-gloss polishing of metal or plastic components that are difficult to access. With this polishing set you can quickly achieve a clear high gloss on carefully pre-polished surfaces with a drill.
Product features
- Shaft tool full round FM230, 80 x 6 mm
- Vmax = 30 m/s, Umax = 7,200 rpm
- Universal EICKELIT high-gloss polishing paste "Low Cut" (approx. 0.2 kg)
Application
- Wear protective equipment and observe safety regulations!
- First roughen the polishing wheel with a suitable dressing tool
- Wet the rotating tool with the polishing paste
- Polish the evenly pre-polished and clean surface quickly in cross-coats, depending on the material, at approx. 15-30 m/s (3,600 - 7,200 rpm) to a high gloss
- Measure the pressure carefully! If the contact pressure is too high and/or the speed is too low, this can lead to an unsteady surface due to overheating of the workpiece
- After polishing, degrease the surface with a soft, lint-free cloth and, if necessary, a suitable cleaning agent
Protective Equipment when Polishing
When grinding and polishing, the work equipment used creates considerable health risks. It is therefore compulsory to wear suitable personal protective equipment for work safety when grinding and polishing. In particular, all rotating polishing and brushing tools may only be operated with suitable covers for reasons of occupational safety.
Wear eye / face protection
The fine dust emanating from polishing is harmful to the eyes. Flying parts can cause serious injuries to the face and eyes.
Wear respiratory protection
Fine dust contaminated with heavy metals and respirable, which can only be retained with suitable respiratory protection, is produced during polishing.
Wear protective clothing
Flying parts can cause sensitive injuries all over the body.
Wear gloves
In general, gloves should be worn when grinding and polishing. If there is a risk of being wound up (e.g. drills, processing small parts, etc.), gloves may be prohibited on the basis of a risk assessment.
Wear ear protection
Due to the noise exposure during grinding and polishing, it is necessary to wear suitable hearing protection on a regular basis.