Polishing set "super-finish" aluminium | 5 parts for angle grinder | M14 adapter | 200 mm

200 mm | 14 mm bore

Contents: polishing discs | compounds | adapter M14

high-gloss | super-finish

Weight: kg
€152.12 -5% You save €7.61
€144.51
Incl. VAT (Total price depending on the VAT rate of the country of delivery), excl. Shipping Cost
Availability
2-3 Days *
  • Buy 1 for €24.61 each and save 5%
  • Buy 1 for €32.21 each and save 5%
  • Buy 1 for €29.75 each and save 5%
  • Buy 1 for €35.34 each and save 5%
  • Buy 1 for €22.61 each and save 5%
Item No.
500-ws-alu-a-200-2

Aluminium super finish polishing set for angle grinders | 200mm

Five-part super finish polishing set with M14 adapter for aluminum especially for hand-held polishing machines or angle grinders with M14 mount. This polishing set reliably delivers the flawless mirror finish that is characteristic of aluminum on carefully pre-polished aluminum surfaces.

Product features

  • High-gloss polishing wheel Effecta N2550, diameter 200 mm x bore 14 mm
  • Super Finish Effecta FM230 polishing wheel, diameter 200 mm x bore 14 mm
  • Vmax = 40 m/s, Umax = 3,800 rpm
  • High-gloss polishing paste Menzerna 480BLF (approx. 1.3 kg)
  • Super Finish polishing paste Menzerna P175 (approx. 1 .35 kg)
  • M14 mandrel for angle grinders, maximum disc thickness: approx. 50 mm, 1 flat nut M14 left-hand thread / approx. 70 mm diameter, 1 flange 2 x 14 x 70 mm

Application

  • Wear protective equipment and follow safety regulations!
  • Roughen the polishing discs before use using a suitable dressing tool
  • Wet rotating tool sparingly with polishing paste
  • Measure the pressure carefully! Too high contact pressure and/or too low speeds lead to overheating of the workpiece with uneven surfaces that can no longer be improved by polishing!

Step 1

  • The evenly pre-polished and cleaned surface in cross passes with the Effecta N2550 polishing wheel and Menzerna 480BLF at approx. 30-35 m/s (2,900 - 3,400 rpm) quickly polish to a high gloss
  • After polishing, the surface is cleaned with a dry, soft and lint-free cloth. If necessary, degrease the workpiece with a suitable solvent or Viennese lime

Step 2

  • The clean, high-gloss polished surface is achieved with the Effecta FM230 Super Finish polishing disc and Menzerna P175 at approx. 30-35 m/s (2,900 - 3,400 rpm) quickly in cross passes until the desired mirror finish is achieved
  • The Super Finish Paste P175 only leaves an invisible microfilm on the flawless surface. To protect this surface, one usually avoids mechanical cleaning after superfinishing