Skip to the beginning of the images gallery

Polishing set "gloss" copper & brass | 4 parts for polishing stand | 300 mm

300 mm | Bore configurable

Contents: polishing discs | compounds

cut-buffing | high-gloss

Weight: kg

€180.75 -5% You save €9.04

€171.71

Incl. VAT (Total price depending on the VAT rate of the country of delivery), excl. Shipping Cost

Availability

2-3 Days *

Item List

Menzerna 456G | "Heavy-Cut" Compound | Brass, Gold, Stainless + €38.50

Buy 1 for €36.58 each and save 5%

Menzerna 480W | Finish Compound | Brass, Copper, Bronze + €26.30

Buy 1 for €24.99 each and save 5%

Cut-Buffing Wheel | Sisal-Cotton SB-VR | 300 mm + €71.50

Buy 1 for €67.93 each and save 5%

Polishing Buff | Cotton Cloth "Light" | 300 mm + €44.45

Buy 1 for €42.23 each and save 5%

Bore Hole

Roughened

Ready-to-use roughened (1x) + €4.00

Qty

Copy Product Link

Item No.

500-pb-cu-300-3

Description

Brass & Copper high-gloss polishing set for the polishing stand | 300mm

Four-piece high-gloss polishing set for Brass & Copper, especially for stationary bench grinders or bench polishers. This polishing set reliably delivers the flawless high gloss characteristic of Brass & Copper on carefully ground Brass & Copper surfaces.

Product features

Sisal nettle pre-polishing disc SB-VR-10, diameter 300 mm with configurable bore
High-gloss cotton buffing disc N2501, diameter 300 mm with configurable bore
V_max = 45 m/s, U_max = 2,900 rpm
Pre-polishing paste "Heavy Cut" Menzerna 456G (approx. 1.2 kg)

Brass & Copper high-gloss polishing paste Menzerna 480W (approx. 1, 3 kg)

Application

Wear protective equipment and follow safety regulations!
Roughen the polishing discs before use using a suitable dressing tool
Wet rotating tool sparingly with polishing paste
Measure the pressure carefully! Too high contact pressure and/or too low speeds lead to overheating of the workpiece with uneven surfaces that can no longer be improved by polishing!

Step 1

The evenly sanded and cleaned surface crosswise with the SB-VR-10 sisal nettle pre-polishing disc together with Menzerna 439T quickly pre-polish at approx. 35-40 m/s (2,250 - 2,600 rpm) until an even, satin-matt surface without scratches and grooves is achieved on the workpiece
After polishing, clean the surface of abrasion and paste residues with a dry, soft and lint-free cloth. If necessary, degrease the workpiece with a suitable solvent or Viennese lime

Step 2

The evenly pre-polished and cleaned surface in cross passes with a high-gloss cotton buffing disc N2501 together with Menzerna 480BLF at approx. 30-35 m/s (1,900 - 2,300 rpm) quickly polish to a high gloss
After polishing, clean the surface with a dry, soft, lint-free cloth. If necessary, degrease the workpiece with a suitable solvent or Viennese lime

Safety instructions

Protective Equipment when Polishing

When grinding and polishing, the work equipment used creates considerable health risks. It is therefore compulsory to wear suitable personal protective equipment for work safety when grinding and polishing. In particular, all rotating polishing and brushing tools may only be operated with suitable covers for reasons of occupational safety.

Wear eye / face protection

The fine dust emanating from polishing is harmful to the eyes. Flying parts can cause serious injuries to the face and eyes.

Wear respiratory protection

Fine dust contaminated with heavy metals and respirable, which can only be retained with suitable respiratory protection, is produced during polishing.

Wear protective clothing

Flying parts can cause sensitive injuries all over the body.

Wear gloves

In general, gloves should be worn when grinding and polishing. If there is a risk of being wound up (e.g. drills, processing small parts, etc.), gloves may be prohibited on the basis of a risk assessment.