Polishing set "gloss" copper & brass | 4 parts for polishing stand | 200 mm
200 mm | Bore configurable
Contents: polishing discs | compounds
cut-buffing | high-gloss
Brass & Copper high-gloss polishing set for the polishing stand | 200mm
Four-piece high-gloss polishing set for Brass & Copper, especially for stationary bench grinders or bench polishers. This polishing set reliably delivers the flawless high gloss characteristic of Brass & Copper on carefully ground Brass & Copper surfaces.
Sisal nettle pre-polishing disc SB-VR-10, diameter 200 mm with configurable bore
High-gloss cotton buffing disc N2501, diameter 200 mm with configurable bore
Measure the pressure carefully! Too high contact pressure and/or too low speeds lead to overheating of the workpiece with uneven surfaces that can no longer be improved by polishing!
The evenly sanded and cleaned surface crosswise with the Sisal nettle pre-polishing disc SB-VR-10 together with Menzerna 439T quickly pre-polish at approx. 35-40 m/s (3,300 - 3,800 rpm) until an even, satin-matt surface without scratches and grooves is achieved on the workpiece
After polishing, clean the surface of abrasion and paste residues with a dry, soft and lint-free cloth. If necessary, degrease the workpiece with a suitable solvent or Viennese lime
The evenly pre-polished and cleaned surface in cross passes with a high-gloss cotton buffing disc N2501 together with Menzerna 480BLF at approx. 30-35 m/s (2,850 - 3,300 rpm) quickly polish to a high gloss
After polishing, clean the surface with a dry, soft, lint-free cloth. If necessary, degrease the workpiece with a suitable solvent or Viennese lime