Polishing set "finish" aluminium | 2 parts for polishing stand | 250 mm
250 mm | Bore configurable
Contents: polishing disc | compound
high-gloss
Weight:
kg
Item No.
500-pb-alu-250-1
Aluminium polishing set "Finish" for the polishing stand | 250mm
Polishing set with configurable bore for high-gloss polishing on the polishing block or grinding block with mounting flange or conical thread. The two-part polishing set quickly delivers a clear high gloss on carefully pre-polished aluminum surfaces.
Product features
- Effecta N2550 polishing wheel, diameter 250 mm / configurable bore
- Vmax = 40 m/s, Umax = 3,100 rpm
- Aluminium high-gloss polishing paste Menzerna 480BLF (approx. 1, 3 kg)
Application
- Wear protective equipment and follow safety regulations!
- First roughen the polishing wheel with the help of a suitable dressing tool
- Wet the rotating tool with the polishing paste
- Polish the evenly pre-polished and clean surface quickly in cross-coats at approx. 30-35 m/s (2,300 - 2,700 rpm) to a high gloss
- Measure the pressure carefully! If the contact pressure is too high and/or the speed is too low, this can lead to an unsteady surface due to overheating of the workpiece
- After polishing, clean the surface with a soft, lint-free cloth and, if necessary, degrease with a suitable solvent or Viennese lime