Polishing set "finish" aluminium | 2 parts for angle grinder M14 | 180 mm

180 mm | 14 mm bore

Contents: polishing disc | compound


Weight: kg
€52.58 -5% You save €2.63
Incl. 19% VAT, excl. Shipping Cost
2-3 Days *
  • Buy 1 for €23.28 each and save 5%
  • Buy 1 for €26.68 each and save 5%
Item No.

"Finish" aluminum polishing set for angle grinders | 180mm

Polishing set for high-gloss polishing with hand polishing machines or angle grinders with M14 shank. The two-part polishing set quickly delivers a clear high gloss on carefully pre-polished aluminum surfaces.

Product features

  • Effecta N2550 polishing wheel, diameter 180 mm / bore 14 mm
  • Vmax = 40 m/s, Umax = 4,200 rpm
  • Aluminium high-gloss polishing paste Menzerna 480BLF (approx. 1, 3 kg)


  • Wear protective equipment and follow safety regulations!
  • Use a suitable dressing tool to roughen polishing wheels first
  • Wet the rotating tool with the polishing paste
  • Polish the evenly pre-polished and clean surface quickly in cross-coats at approx. 30-35 m/s (3,300 - 3,800 rpm) to a high gloss
  • Measure the pressure carefully! If the contact pressure is too high and/or the speed is too low, this can lead to an unsteady surface due to overheating of the workpiece
  • After polishing, clean the surface with a soft, lint-free cloth and, if necessary, degrease with a suitable solvent or Viennese lime