Polishing set "Gloss" Varnishes & Plastics | 4 parts for drill | 80 mm
80 mm | 6 mm shank
Contents: polishing discs | compounds
cut-buffing | high-gloss
Weight:
kg
Item No.
500-bm-poly-80-3
Plastics and Varnish "high gloss" polishing-kit | drills | 80mm
The four-part "high-gloss" polishing-kit for plastics and varnishes enables high-gloss polishing of components that are difficult to access. This polishing set reliably delivers in three consecutive steps a flawless high gloss and transparency
Product features
- EFFEKTA N2550 shank tool, 80 x 6 mm
- EFFEKTA FM230 shank tool, 80 x 6 mm
- Vmax = 30 m/s, Umax = 7,200 rpm
- Pre-polishing paste "Heavy Cut" Menzerna GW18 (approx. 1.1 kg)
- Plastics and paint high gloss polishing compound Menzerna GW16 (approx. 1.35 kg)
Application
- Wear protective equipment and follow safety regulations!
- Roughen the polishing discs before use using a suitable dressing tool
- Wet rotating tool sparingly with polishing paste
- Measure the pressure carefully! Too high contact pressure and/or too low speeds lead to overheating of the workpiece with uneven surfaces that can no longer be improved by polishing!
Step 1
- The evenly sanded and cleaned surface crosswise with the shank tool EFFEKTA N2550 together with Menzerna GW18 quickly pre-polish on lacquer and thermoset surfaces at approx. 20-25 m/s (4,900 - 6,200 rpm), on thermoplastic workpieces at approx. 10 -15 m/s (2,400 - 3,700 rpm) until the workpiece has an even, satin-matt surface without scratches or grooves
- After polishing, clean the surface of abrasion and paste residues with a dry, soft and lint-free cloth. If necessary, degrease the workpiece with a tenside solution
Step 2
- The evenly pre-polished and cleaned surface in cross passes with a shank tool EFFEKTA FM230 together with Menzerna GW16 on lacquer and thermoset surfaces at approx. 20-25 m/s (4,900 - 6,200 rpm), on thermoplastic workpieces at approx. 10 -15 m/s (2,400 - 3,700 rpm) quickly polish to a high gloss
- After polishing, clean the surface with a dry, soft, lint-free cloth. If necessary, degrease the workpiece with a tenside solution