Polishing set "finish" Varnishes & Plastics | 2 parts for polishing stand | 180 mm
180 mm | Bore configurable
Contents: polishing disc | compound
Polishing-kit "Finish" for plastics and varnished surfaces | polishing stand | 180mm
Polishing-kit with configurable bore for high-gloss polishing on the polishing block or grinding block with mounting flange or conical thread. The two-part polishing set quickly delivers a clear high gloss on carefully pre-polished plastics and varnished surfaces.
Polish the evenly pre-polished and clean surface quickly in cross-coats on lacquer and thermoset surfaces at approx. 20-25 m/s (2,200 - 2,700 rpm), on thermoplastic workpieces at approx. 10 -15 m/s (1,100 - 1,600 rpm) to a high gloss
Measure the pressure carefully! If the contact pressure is too high and/or the speed is too low, this can lead to an unsteady surface due to overheating of the workpiece
After polishing, clean the surface with a soft, lint-free cloth and, if necessary, degrease with a tenside solution