Polishing set "finish" Varnishes & Plastics | 2 parts for angle grinder M14 | 200 mm

200 mm | 14 mm bore

Contents: polishing disc | compound


Weight: kg
€59.90 -5% You save €2.99
Incl. VAT (Total price depending on the VAT rate of the country of delivery), excl. Shipping Cost
2-3 Days *
  • Buy 1 for €35.34 each and save 5%
  • Buy 1 for €21.57 each and save 5%
Item No.

Plastics and varnish polishing-kit "Finish" | angle grinders | 200mm

Polishing-kit for high-gloss polishing with hand polishing machines or angle grinders with M14 shank. The two-part polishing-kit quickly delivers a clear high gloss on carefully pre-polished plastics or varnished surfaces.

Product features

  • EFFEKTA X-1 "semless" FM230 polishing wheel, diameter 200 mm / bore 14 mm
  • Vmax = 40 m/s, Umax = 3,800 rpm
  • High-gloss polishing compound Menzerna GW16 (approx. 1.3 kg)


  • Wear protective equipment and follow safety regulations!
  • Roughen the polishing wheel first with the help of a suitable dressing tool
  • Wet the rotating tool with the polishing paste
  • Polish the evenly pre-polished and clean surface quickly in cross-coats on lacquer and thermoset surfaces at approx. 20-25 m/s (1,900 - 2,400 rpm), on thermoplastic workpieces at approx. 10 -15 m/s (980 - 1,450 rpm) to a high gloss
  • Measure the pressure carefully! If the contact pressure is too high and/or the speed is too low, this can lead to an unsteady surface due to overheating of the workpiece
  • After polishing, clean the surface with a soft, lint-free cloth and, if necessary, degrease with a tenside solution