Non-Woven Shop-Roll AO-004
10 x 0,1 m
Nylon / Al-Ox
"Mittel" / Grit 180
PRODUCT DESCRIPTION ABRASIVE FLEECE roll AO-004 | GRIT 180
EICKELIT abrasive fleece sold by the meter consists of a randomly woven nylon fleece with firmly bonded abrasive grain. It is used in particular for cleaning, fine grinding, matting and satin finishing of steel and non-ferrous metals. With our wide range of abrasive nonwovens based on aluminum oxide or silicon carbide, we answer a wide variety of application-related requirements from our customers.
Because the tangled fleece is very flexible, fleece lamellar polishing discs can be used to process complex shapes very efficiently with gentle removal. As a result of wear, fresh grinding bodies are constantly released in uniform concentrations in the fleece. Abrasive fleece does not become clogged with abrasion and therefore provides a very homogeneous grinding pattern during its service life.
Product features
- AO-004 has an aluminum oxide abrasive with a grit of approx. 180 for a medium-fine finish
- Abrasive fleece AO-004 has a medium-firm texture
- Width approx. 100 mm / length approx. 10 m
- Delivery form: roll
Benötigen Sie weitere technische Informationen, dann folgen Sie bitte den Links zu dem von uns eingesetzten Schleifvlies-Sortiment und unseren Anwendungstechnischen Tipps und Hinweisen.
Protective Equipment when Polishing
When grinding and polishing, the work equipment used creates considerable health risks. It is therefore compulsory to wear suitable personal protective equipment for work safety when grinding and polishing. In particular, all rotating polishing and brushing tools may only be operated with suitable covers for reasons of occupational safety.
Wear eye / face protection
The fine dust emanating from polishing is harmful to the eyes. Flying parts can cause serious injuries to the face and eyes.
Wear respiratory protection
Fine dust contaminated with heavy metals and respirable, which can only be retained with suitable respiratory protection, is produced during polishing.
Wear protective clothing
Flying parts can cause sensitive injuries all over the body.
Wear gloves
In general, gloves should be worn when grinding and polishing. If there is a risk of being wound up (e.g. drills, processing small parts, etc.), gloves may be prohibited on the basis of a risk assessment.
Wear ear protection
Due to the noise exposure during grinding and polishing, it is necessary to wear suitable hearing protection on a regular basis.
AlOx AO-004 | Grit 180
Diameter 80 - 200 mm
Bore 12 mm
Packing Unit = 10 pc