Menzerna 113GZ | Heavy Cut | Brass & Aluminium
Heavy Cut | Brass & Aluminium
Colour: Brown | Grease Content: Greasy
PROFESSIONAL USERS ONLY
MENZERNA 113 GZ heavy-cut cutting paste for brass and aluminium
113GZ is an abrasive paste with tripel / diatomaceous earth. It is very effective and very economical to use. On P240-280 ground surfaces, mill scale or finely turned parts, the polishing paste 113 GZ provides a uniform surface that is already suitable for electroplating or serves as a basis for the high-gloss finish.
Due to the ingredient tripel / diatomaceous earth, this polishing paste can only be supplied to commercial users upon proof of expertise. Please note our safety instructions.
Product features
- Pre-polishing paste for effective removal and an even surface appearance
- Fat content: Grease especially for brass and other non-ferrous metals
- Color: Brown
- Application together with sisal polishing discs or Mexico fiber polishing brushes
Safety Advise
Sale exclusively to tradesmen with proven expertise
- Danger: Triple / diatomaceous earth
- Damages the lungs in case of prolonged or repeated exposure
- Exposure route: Inhalation/Inspiration
- Do not inhale dust/fume/gas/mist/vapour/aerosol.
- Wash thoroughly after use
- Do not eat, drink or smoke during use
- If you feel unwell, seek medical advice / seek medical help.
- Dispose of contents/container in accordance with local/regional/national/international regulations.
Protective Equipment when Polishing
When grinding and polishing, the work equipment used creates considerable health risks. It is therefore compulsory to wear suitable personal protective equipment for work safety when grinding and polishing. In particular, all rotating polishing and brushing tools may only be operated with suitable covers for reasons of occupational safety.
Wear eye / face protection
The fine dust emanating from polishing is harmful to the eyes. Flying parts can cause serious injuries to the face and eyes.
Wear respiratory protection
Fine dust contaminated with heavy metals and respirable, which can only be retained with suitable respiratory protection, is produced during polishing.
Wear protective clothing
Flying parts can cause sensitive injuries all over the body.
Wear gloves
In general, gloves should be worn when grinding and polishing. If there is a risk of being wound up (e.g. drills, processing small parts, etc.), gloves may be prohibited on the basis of a risk assessment.
Wear ear protection
Due to the noise exposure during grinding and polishing, it is necessary to wear suitable hearing protection on a regular basis.