REX Corrugated Buffing Wheel | Cotton "Extra Firm" | 350 x 80,5 mm
Material: N24032
Diameter: 350 mm
Bore Hole: 80.5 mm
PRODUKTEIGENSCHAFTEN
- Fan-shaped construction delivers intensely cooling airflows for best productivity at high performance levels
- Up to 40 plies of corrugated raw cotton fabrics with 45° biased weave
- Firm stand providig high counter pressure for effective cut- and fine-buffing
- Diameter 350 mm, Bore Hole 80,5 mm
- Calibrated for low-vibration concentricity
Protective Equipment when Polishing
When grinding and polishing, the work equipment used creates considerable health risks. It is therefore compulsory to wear suitable personal protective equipment for work safety when grinding and polishing. In particular, all rotating polishing and brushing tools may only be operated with suitable covers for reasons of occupational safety.
Wear eye / face protection
The fine dust emanating from polishing is harmful to the eyes. Flying parts can cause serious injuries to the face and eyes.
Wear respiratory protection
Fine dust contaminated with heavy metals and respirable, which can only be retained with suitable respiratory protection, is produced during polishing.
Wear protective clothing
Flying parts can cause sensitive injuries all over the body.
Wear gloves
In general, gloves should be worn when grinding and polishing. If there is a risk of being wound up (e.g. drills, processing small parts, etc.), gloves may be prohibited on the basis of a risk assessment.
Wear ear protection
Due to the noise exposure during grinding and polishing, it is necessary to wear suitable hearing protection on a regular basis.