Our EICKELIT shop will remain open for you during the Christmas and New Year holidays. However, all orders received after 19.12.2024 will only be processed and dispatched from 06.01.2025. The EICKELIT team wishes you a Merry Christmas and a Happy New Year 2025!

Shank Tool "Pre-polishing" | Sisal Nettle | 150 mm

Sisal-Cotton SB-VR

Diameter: 150 x 8 mm Shank

Thickness: 25 mm

Weight: kg
€36.95
Incl. VAT (Total price depending on the VAT rate of the country of delivery), excl. Shipping Cost
  • Buy 3 for €35.84 each and save 3%
  • Buy 5 for €34.36 each and save 7%
  • Buy 10 for €32.52 each and save 12%
Availability
2-3 Days *
Item No.
603-SBVR-150

Shank Tool Sisal Nettle | 150 mm

SB-VR cut-buffing discs consist of a manifold of sisal sheets, each covered with cotton on both sides. Compared to the grinding work of pure sisal, sisal-cotton tools additionally display a surface smoothing effect due to the cotton inserts. Moreover, compared to other SB polishing discs, SB-VR polishing tools allow the highest counter pressure for improved effectiveness. As a result, SB-VR deliver matt to silky glossy surfaces, which in industrial practice are often further processed without requiring additional finish-buffing.

Our shank tools are miniature versions of the tried and tested EICKELIT designs. They complement the buffing process when it comes to the precise cut-buffing and finishing, particularly of surfaces with complex geometries.

PRODUCT FEATURES

  • Shaft tool with 10 plies made of dense cotton covered sisal fabric, both fabrics with 45° biased weave
  • Concentric quilted circles made of natural linen machine thread, which wears off during the polishing process without leaving any residue
  • Diameter 150 mm, width ca. 25 mm
  • Shaft diameter 8 mm, cast with thermosetting synthetic resin compound
  • Vmax = 30 m/s, Umax = 3,800 min-1

SISAL-COTTON COMPOSITE

Sisal is obtained from specific agave species in global cultivation areas. Similar to other natural fibers, sisal fibers are very resistant to physical and chemical stresses. In addition, sisal is very tough, has high tensile strength and is also characterized by its high rigidity. This is why sisal is particularly suitable for polishing and coarse cut-buffing of metals and especially steel.

Our sisal-cotton composites consist of sisal fabric with a dense, diagonally biased plain weave. The sisal fabric is covered on both sides with light raw cotton fabric and stitched together with fine cotton threads at a seam distance of approx. 10 mm. The resulting firm sisal-cotton composite material is then further processed into the variants of the EICKELIT SB-X cut-buffing tools.

Protective Equipment when Polishing

When grinding and polishing, the work equipment used creates considerable health risks. It is therefore compulsory to wear suitable personal protective equipment for work safety when grinding and polishing. In particular, all rotating polishing and brushing tools may only be operated with suitable covers for reasons of occupational safety.

ISO 7010 M013 Wear eye / face protection

Wear eye / face protection

The fine dust emanating from polishing is harmful to the eyes. Flying parts can cause serious injuries to the face and eyes.

ISO 7010 M017 Wear respiratory protection

Wear respiratory protection

Fine dust contaminated with heavy metals and respirable, which can only be retained with suitable respiratory protection, is produced during polishing.

ISO 7010 M010 Wear protective clothing

Wear protective clothing

Flying parts can cause sensitive injuries all over the body.

ISO 7010 M009 Wear gloves

Wear gloves

In general, gloves should be worn when grinding and polishing. If there is a risk of being wound up (e.g. drills, processing small parts, etc.), gloves may be prohibited on the basis of a risk assessment.

ISO 7010 M003 Wear ear protection

Wear ear protection

Due to the noise exposure during grinding and polishing, it is necessary to wear suitable hearing protection on a regular basis.

Details according to Regulation (EU) 2023/988 (GPSR)

Manufacturer

Menzerna polishing compounds GmbH & Co. KG, Industriestraße 25,76470 ÖTIGHEIM, info@menzerna.com

Responsible Person

Menzerna polishing compounds GmbH & Co. KG, Abteilung Produkt- und Umweltsicherheit, Industriestraße 25,76470 ÖTIGHEIM, sds@menzerna.com