Polishing set "Gloss" Varnishes & Plastics | 5 parts for angle grinder | M14 adapter | 250 mm

250 mm | 14 mm bore

Contents: polishing discs | compounds | adapter M14

cut-buffing | high-gloss

Weight: kg
€165.85 -5% You save €8.29
€157.56
Incl. VAT (Total price depending on the VAT rate of the country of delivery), excl. Shipping Cost

Discount compared to single retail prices

Availability
2-3 Days *
  • Buy 1 for €32.78 each and save 5%
  • Buy 1 for €43.46 each and save 5%
  • Buy 1 for €25.75 each and save 5%
  • Buy 1 for €21.57 each and save 5%
  • Buy 1 for €34.01 each and save 5%
Item No.
500-ws-poly-a-250-3

High-gloss polishing-kit for plastics and varnishes | angle grinders | 250mm

Five-piece high-gloss polishing-kit with M14 adapter for plastics and varnishes, especially for hand-held polishing machines or angle grinders with M14 mount. This polishing-kit reliably delivers a flawless high gloss and transparency on plastics and varnished surfaces.

Product features

  • Cut-buffing wheel KONSTANT 4-4 N16, diameter 250 mm x bore 14 mm
  • Vmax = 45 m/s, Umax = 3,400 rpm
  • High-gloss polishing wheel EFFEKTA FM230, diameter 250 mm x bore 14 mm
  • Vmax = 40 m/s, Umax = 3,100 rpm
  • Pre-polishing paste "Heavy Cut" Menzerna GW18 (approx. 1.1 kg)
  • High-gloss polishing compound Menzerna GW16 (approx. 1.3 kg)
  • M14 mandrel for angle grinders, maximum disc thickness: approx. 50 mm, 1 flat nut M14 left-hand thread / approx. 70 mm diameter, 1 flange 2 x 14 x 70 mm

Application

  • Wear protective equipment and follow safety regulations!
  • Roughen the polishing discs before use using a suitable dressing tool
  • Wet rotating tool sparingly with polishing paste
  • Measure the pressure carefully! Too high contact pressure and/or too low speeds lead to overheating of the workpiece with uneven surfaces that can no longer be improved by polishing!

Step 1

  • The evenly sanded and cleaned surface crosswise with the cut-buffing disc KONSTANT N16 together with Menzerna GW18 quickly pre-polish on lacquer and thermoset surfaces at approx. 20-25 m/s (1,550 - 1,950 rpm), on thermoplastic workpieces at approx. 10 -15 m/s (780 - 1,150 rpm) until the workpiece has an even, satin-matt surface without scratches or grooves
  • After polishing, clean the surface of abrasion and paste residues with a dry, soft and lint-free cloth. If necessary, degrease the workpiece with a tenside solution

Step 2

  • The evenly pre-polished and cleaned surface in cross passes with the EFFEKTA FM230 polishing wheel together with Menzerna GW16 on lacquer and thermoset surfaces at approx. 20-25 m/s (1,550 - 1,950 rpm), on thermoplastic workpieces at approx. 10 -15 m/s (780 - 1,150 rpm) quickly polish to a high gloss
  • After polishing, clean the surface with a dry, soft, lint-free cloth. If necessary, degrease the workpiece with a tenside solution