Polishing set "Gloss" Varnishes & Plastics | 4 parts for angle grinder M14 | 250 mm
250 mm | 14 mm bore
Contents: polishing discs | compounds
cut-buffing | high-gloss
Plastics and varnishes high-gloss polishing-kit | angle grinders | 250mm
Four-part plastics and varnishes high-gloss polishing-kit, especially for hand-held polishing machines or angle grinders with M14 mount. This polishing-kit reliably delivers a flawless high gloss and transparency on plastics and varnished surfaces.
cut-buffing disc KONSTANT 4-4 N16, diameter 250 mm x bore 14 mm
Vmax = 45 m/s, Umax = 3,400 rpm
High-gloss polishing wheel EFFEKTA FM230, diameter 250 mm x bore 14 mm
Measure the pressure carefully! Too high contact pressure and/or too low speeds lead to overheating of the workpiece with uneven surfaces that can no longer be improved by polishing!
The evenly sanded and cleaned surface crosswise with the cut-buffing disc KONSTANT N16 together with Menzerna GW18 quickly pre-polish on lacquer and thermoset surfaces at approx. 20-25 m/s (1,550 - 1,950 rpm), on thermoplastic workpieces at approx. 10 -15 m/s (780 - 1,150 rpm) until the workpiece has an even, satin-matt surface without scratches or grooves
After polishing, clean the surface of abrasion and paste residues with a dry, soft and lint-free cloth. If necessary, degrease the workpiece with a tenside solution
The evenly pre-polished and cleaned surface in cross passes with the polishing wheel EFFEKTA FM230 together with Menzerna GW16 on lacquer and thermoset surfaces at approx. 20-25 m/s (1,550 - 1,950 rpm), on thermoplastic workpieces at approx. 10 -15 m/s (780 - 1,150 rpm) quickly polish to a high gloss
After polishing, clean the surface with a dry, soft, lint-free cloth. If necessary, degrease the workpiece with a tenside solution