EFFEKTA Buffing Wheel | Cotton "Firm" | 400 mm
Material: N2550
12 Pleated Layers
Diameter 400 mm
PRODUCT FEATURES
- Finish buffing wheel made of soft raw cotton Molton for the stationary polishing stand
- 24 layers in a mirror-inverted arrangement with soft folds for efficient cooling on profiled surfaces
- Diameter 400 mm, thickness at the hole approx. 22 mm
- Selectable mounting holes from 35 - 65 mm
- Individually calibrated for low-vibration work
- Optionally pre-roughened ready for use on request
- V max = 40 m / s, U max = 1,900 min -1
Protective Equipment when Polishing
When grinding and polishing, the work equipment used creates considerable health risks. It is therefore compulsory to wear suitable personal protective equipment for work safety when grinding and polishing. In particular, all rotating polishing and brushing tools may only be operated with suitable covers for reasons of occupational safety.
Wear eye / face protection
The fine dust emanating from polishing is harmful to the eyes. Flying parts can cause serious injuries to the face and eyes.
Wear respiratory protection
Fine dust contaminated with heavy metals and respirable, which can only be retained with suitable respiratory protection, is produced during polishing.
Wear protective clothing
Flying parts can cause sensitive injuries all over the body.
Wear gloves
In general, gloves should be worn when grinding and polishing. If there is a risk of being wound up (e.g. drills, processing small parts, etc.), gloves may be prohibited on the basis of a risk assessment.
Wear ear protection
Due to the noise exposure during grinding and polishing, it is necessary to wear suitable hearing protection on a regular basis.