Buffing Wheel KONSTANT | Cotton "Firm" | 300 mm
Material: N2550
4 x 4 Plies
Diameter: 300 mm
PRODUCT DESCRIPTION KONSTANT 4-4 / diameter 300 mm
EICKELIT KONSTANT 4-4 type polishing discs are primarily used for polishing aluminum, stainless steel or paint. The pleated Z-fold cotton fabric layers provide a high contact pressure. At the same time, this type of polishing wheel readily adapts to the surface profile. Thanks to its folds, KONSTANT creates a strong air flow and thus a very effective cooling of the workpiece surface.
PRODUCT FEATURES
- Z-pleated layers of strong raw cotton fabric N2550
- High contact pressure with strong cooling effect
- Pre- and main polishing on all metals
- Diameter 300 mm / core thickness approx. 22 mm
- Individual bores 10 - 60 mm selectable
- Low-vibration concentricity through individual calibration
- Roughened ready-to-use on request
- Vmax = 40 m/s, Umax = 2,550 min-1
COTTON QUALITY
We only use Oeko-Tex® certified fabrics made from raw cotton in EICKELIT polishing discs. The cotton fabric used does not contain any synthetic fibers, which means that EICKELIT polishing discs are very durable and wear out particularly evenly with little dust formation. We always have an extensive range of different unbleached cotton fabrics in stock.
Nessel N2550 is used to polish non-ferrous metals, plastics and paint. N2550 is a solid raw cotton cretonne with a specific weight of approx. 230 g/m².
APPLICATIONS Konstant Polishing Discs
Due to their pleated trimmings made of several individual layers of cotton fabric, KONSTANT polishing rings provide a strong counter-pressure. This makes KONSTANT polishing discs significantly stronger than our EFFEKTA high-gloss polishing discs with soft folding and softer than cotton polishing disks made from full-round fabric sheets.
KONSTANT polishing discs are used in particular for pre-polishing non-ferrous metals and stainless steel. With our wide variety of cotton fabrics, KONSTANT polishing discs can be used universally.
KONSTANT polishing rings, with their Z-shaped folds, deliver a powerful flow of air and thus have a cooling effect. In addition, KONSTANT polishing discs produce extraordinarily homogeneous polishing patterns on large surfaces and on shaped workpieces.
Protective Equipment when Polishing
When grinding and polishing, the work equipment used creates considerable health risks. It is therefore compulsory to wear suitable personal protective equipment for work safety when grinding and polishing. In particular, all rotating polishing and brushing tools may only be operated with suitable covers for reasons of occupational safety.
Wear eye / face protection
The fine dust emanating from polishing is harmful to the eyes. Flying parts can cause serious injuries to the face and eyes.
Wear respiratory protection
Fine dust contaminated with heavy metals and respirable, which can only be retained with suitable respiratory protection, is produced during polishing.
Wear protective clothing
Flying parts can cause sensitive injuries all over the body.
Wear gloves
In general, gloves should be worn when grinding and polishing. If there is a risk of being wound up (e.g. drills, processing small parts, etc.), gloves may be prohibited on the basis of a risk assessment.
Wear ear protection
Due to the noise exposure during grinding and polishing, it is necessary to wear suitable hearing protection on a regular basis.