Polishing set "super-finish" aluminium | 4 parts for polishing stand | 200 mm
200 mm | Bore configurable
Contents: polishing discs | compounds
high-gloss | super-finish
Aluminium super finish polishing set for the polishing stand | 200mm
Four-part super finish polishing set for aluminum especially for the polishing block or grinding block with mounting flange or conical thread. This polishing set reliably delivers the flawless mirror finish that is characteristic of aluminum on carefully pre-polished aluminum surfaces.
High-gloss polishing wheel Effecta N2550, diameter 200 mm with freely configurable bore
Super Finish Effecta FM230 polishing disc, diameter 200 mm with freely configurable bore
Measure the pressure carefully! Too high contact pressure and/or too low speeds lead to overheating of the workpiece with uneven surfaces that can no longer be improved by polishing!
The evenly pre-polished and cleaned surface in cross passes with the Effecta N2550 polishing wheel and Menzerna 480BLF at approx. 30-35 m/s (2,900 - 3,400 rpm) quickly polish to a high gloss
After polishing, the surface is cleaned with a dry, soft and lint-free cloth. If necessary, degrease the workpiece with a suitable solvent or Viennese lime
The clean, high-gloss polished surface is achieved with the Effecta FM230 Super Finish polishing disc and Menzerna P175 at approx. 30-35 m/s (2,900 - 3,400 rpm) quickly in cross passes until the desired mirror finish is achieved
The Super Finish Paste P175 only leaves an invisible microfilm on the flawless surface. To protect this surface, one usually avoids mechanical cleaning after superfinishing