Polishing set "super-finish" Inox | 4 parts for drill | 150 mm

150 mm | 8 mm shank

Contents: polishing discs | compounds

High-Gloss finish

Weight: kg
€96.98 -5% You save €4.85
€92.13
Incl. 19% VAT, excl. Shipping Cost
Availability
2-3 Days *
  • Buy 1 for €14.73 each and save 5%
  • Buy 1 for €20.43 each and save 5%
  • Buy 1 for €27.13 each and save 5%
  • Buy 1 for €29.85 each and save 5%
Item No.
500-bm-inox-150-2

INOX finish polishing set for drills | 150mm

The four-part finish polishing set for stainless steel enables hard-to-reach INOX components to be polished to a high gloss. This polishing set reliably delivers the flawless mirror finish that is characteristic of stainless steel on carefully pre-polished surfaces.

Product features

  • Shank mounted buffing wheel N2550, 150 x 8 mm
  • Shank mounted buffing wheel FM230, 150 x 8 mm
  • Vmax = 30 m/s, Umax = 3,800 rpm
  • High-gloss polishing paste Menzerna P14F (approx. 1.3 kg)
  • high gloss finish polishing paste Menzerna P126 (approx. 1.3 kg)

Application

  • Wear protective equipment and follow safety regulations!
  • Roughen the polishing discs before use using a suitable dressing tool
  • Wet rotating tool sparingly with polishing paste
  • Measure the pressure carefully! Too high contact pressure and/or too low speeds lead to overheating of the workpiece with uneven surfaces that can no longer be improved by polishing!

Step 1

  • Quickly polish the pre-polished and cleaned surface in cross passes with a shank mounted buffing wheel N2550 and Menzerna P14F at approx. 25-30 m/s (3,300 - 3,800 rpm) to a high gloss
  • After polishing, clean the surface with a dry, soft, lint-free cloth. If necessary, degrease the workpiece with a suitable solvent or Viennese lime

Step 2

  • Polish the clean, shiny surface using the N16 shank tool and Menzerna P126 at approx. 25-30 m/s (3,300 - 3,800 rpm) in cross passes until obtaining a high gloss finish