Polishing set "Gloss" aluminium | 5 parts for angle grinder | M14 adapter | 150 mm

150 mm | 14 mm bore

Contents: polishing discs | compounds | adapter M14

cut-buffing | high-gloss

Weight: kg
€118.05 -5% You save €5.90
€112.15
Incl. 19% VAT, excl. Shipping Cost
Availability
2-3 Days *
  • Buy 1 for €16.25 each and save 5%
  • Buy 1 for €23.28 each and save 5%
  • Buy 1 for €24.84 each and save 5%
  • Buy 1 for €25.18 each and save 5%
  • Buy 1 for €22.61 each and save 5%
Item No.
500-ws-alu-a-150-3

Aluminium high-gloss polishing set for angle grinders | 150mm

Five-piece high-gloss polishing set with M14 adapter for aluminium, especially for hand-held polishing machines or angle grinders with M14 mount. This polishing set reliably delivers the flawless high gloss characteristic of aluminum on carefully ground aluminum surfaces.

Product features

  • Pre-polishing disc sisal nettle SB-VR-10, diameter 150 mm x bore 14 mm
  • Vmax = 45 m/s, Umax = 5,700 rpm
  • High-gloss polishing wheel Effecta N2550, diameter 150 mm x bore 14 mm
  • Vmax = 40 m/s, Umax = 5,100 rpm
  • Pre-polishing paste "Heavy Cut" Menzerna 439T (approx. 1.2 kg)
  • Aluminium high-gloss polishing paste Menzerna 480BLF (approx. 1, 3 kg)
  • M14 mandrel for angle grinders, maximum disc thickness: approx. 50 mm, 1 flat nut M14 left-hand thread / approx. 70 mm diameter, 1 flange 2 x 14 x 70 mm

Application

  • Wear protective equipment and follow safety regulations!
  • Roughen the polishing discs before use using a suitable dressing tool
  • Wet rotating tool sparingly with polishing paste
  • Measure the pressure carefully! Too high contact pressure and/or too low speeds lead to overheating of the workpiece with uneven surfaces that can no longer be improved by polishing!

Step 1

  • The evenly sanded and cleaned surface crosswise with the SB-VR-10 sisal nettle shaft tool together with Menzerna 439T quickly pre-polish at approx. 35-40 m/s (4,400 - 5,100 rpm) until an even, satin-matt surface without scratches and grooves is achieved on the workpiece
  • After polishing, clean the surface of abrasion and paste residues with a dry, soft and lint-free cloth. If necessary, degrease the workpiece with a suitable solvent or Viennese lime

Step 2

  • The evenly pre-polished and cleaned surface in cross passes with a shank tool Effekta N2550 together with Menzerna 480BLF at approx. 30-35 m/s (3,900 - 4,500 rpm) quickly polish to a high gloss
  • After polishing, clean the surface with a dry, soft, lint-free cloth. If necessary, degrease the workpiece with a suitable solvent or Viennese lime